Rekocut system.....

Post: # 14247Unread post **dietrich10** Fri Apr 15, 2011 5:08 pm

Ok added a Rekocut system....

TR43H turntable with M-12S cutter+ R8B amp and Audax head....

But already seems the lead screw is screwed...no idea how to get the head to engage.........

i'll post pics if i remember how to do it later
D

Post: # 14248Unread post **TotalSonic** Fri Apr 15, 2011 7:05 pm

Dietrich -
There's an ebay auction up in 3 days for a M-12S overhead and a Rek-o-kut platter - maybe you might want to grab it if you can for spare parts

http://cgi.ebay.com/Rek-O-Kut-M-12S-Record-Cutter-w-Astatic-Head-Platter-/320684664927?pt=Vintage_Electronics_R2&hash=item4aaa4ba85f

Best regards,
Steve Berson

Post: # 14249Unread post **dietrich10** Fri Apr 15, 2011 7:18 pm

yes early high bidder on it thanks! what am i doing...i dont have time to set it up yet either...but it all works unlike the rca

Post: # 14255Unread post **JayDC** Fri Apr 15, 2011 11:41 pm

whats wrong with the rca?

Post: # 14256Unread post **cymbalism** Sat Apr 16, 2011 12:03 am

Damn D, the RCA didn't work? Talk to her about it man, when I got the wrong Grampian she refunded my money.

Post: # 14262Unread post **dietrich10** Sat Apr 16, 2011 8:21 am

The RCA we are restoring it slowly. Had to cut down the table to start from 6 ft to just over 4 now. That work is almost done. Next is to rewire connections we had to move on the table and into the small controller area.

After all this we will taking the lathe apart and cleaning it up.

Post: # 14266Unread post **dietrich10** Sat Apr 16, 2011 12:34 pm

anyone close up rekokut m12 with the half nut?
trying to figure out which part is missing.

Post: # 14272Unread post **mratx** Sat Apr 16, 2011 3:24 pm

Here are some shots of mine, I couldn't quickly figure out how to imbed the images.

http://www.flickr.com/photos/61828743@N03/sets/72157626511250344/

Mark