My DIY Lathe Recorder Project
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
My DIY Lathe Recorder Project
My old DIY lathe cutter Project that i now should trash
it s a new Construction on the way i send some drawings of the new lathe i should build
it s a new Construction on the way i send some drawings of the new lathe i should build
You do not have the required permissions to view the files attached to this post.
Re: my diy lhate recorder project
Really cool diy setup! Welcome to the forum and explore.
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: my diy lhate recorder project
thanks i post some more Pictures of my diy lhate
You do not have the required permissions to view the files attached to this post.
Re: my diy lhate recorder project
hej ! welcome aboard !
What specificity of your former lathe you want to improve ?
What specificity of your former lathe you want to improve ?
------------------------------------------------------
http://www.flickr.com/photos/49941863@N04/sets/72157632396669506/
http://www.flickr.com/photos/49941863@N04/sets/72157632396669506/
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: my diy lhate recorder project
thanks this forum is great, I think!
what I want to change is = remove vibration transfer from the engine through the screw out to arm
and make the arm more stable build a better engraver anytime something like neuman westex just I get blueprints for this stuff etc.
and replace the disc work which for the moment is an English that does not work satisfaing due to numerous layer is worn
it should be replaced with a lenco L75
what I want to change is = remove vibration transfer from the engine through the screw out to arm
and make the arm more stable build a better engraver anytime something like neuman westex just I get blueprints for this stuff etc.
and replace the disc work which for the moment is an English that does not work satisfaing due to numerous layer is worn
it should be replaced with a lenco L75
Re: my diy lhate recorder project
wow...neuman like lathe... This is what I call a challenge..
Regarding vibration, have you tried to slice the nut screw in two ? I did that and it improved a bit...
That said I strongly wonder what system is the better : a screw or transmission belt+pulley (like printers)
I am myself in the neverending process of building/rebuilding my diy lathe and so far I used a rod screw + nut screw slided in two.
This evening I saw a guy in the street throwing away a cannon printer I immediately retrieved
I finished to salvaged it few minutes ago and the pulley/belt system looks really smooth and steady...so I maybe will try to play with it....
Regarding vibration, have you tried to slice the nut screw in two ? I did that and it improved a bit...
That said I strongly wonder what system is the better : a screw or transmission belt+pulley (like printers)
I am myself in the neverending process of building/rebuilding my diy lathe and so far I used a rod screw + nut screw slided in two.
This evening I saw a guy in the street throwing away a cannon printer I immediately retrieved
I finished to salvaged it few minutes ago and the pulley/belt system looks really smooth and steady...so I maybe will try to play with it....
------------------------------------------------------
http://www.flickr.com/photos/49941863@N04/sets/72157632396669506/
http://www.flickr.com/photos/49941863@N04/sets/72157632396669506/
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: my diy lhate recorder project
intresting i have allredy try printers and it can work but i dont like the plastic slade my self but building and rebuilding is the funnyest thing i Think to
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
intresting lhate [lathe] cutter you got ther chaosbc !!
great
great
Re: My DIY Lathe Recorder Project
looks good. I too am interested in building a cutter with a two speaker set up.
Your drawings are interesting -too -can't wait to see what becomes of your project.
Are you going to start from scratch and build a new head -or take apart your old one
and use the parts from there?
Your drawings are interesting -too -can't wait to see what becomes of your project.
Are you going to start from scratch and build a new head -or take apart your old one
and use the parts from there?
Cheers,
recordboy
recordboy
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
thanks for youre intrest in my new diy lahte [lathe] project recordboy .
i whill use mostly new part for my new project
i have started to colect spare parts now before i can start building it
i whill showing some picturs on the way of the building of my new diy lathe and of some of the parts i while use on the way to the compleat diy lathe
pictures while come soon
best regards froam record cutter 76
i whill use mostly new part for my new project
i have started to colect spare parts now before i can start building it
i whill showing some picturs on the way of the building of my new diy lathe and of some of the parts i while use on the way to the compleat diy lathe
pictures while come soon
best regards froam record cutter 76
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
ithings i have baught for my new diy cutter project
You do not have the required permissions to view the files attached to this post.
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
more image photos of things i goot to the new diy lathe cutter projekt
now it is only some Wood parts left befor i can start to build etc a turnplatter made in thick 60 cm gerth
42 cm wide . a new motor whithe gear box to drive the scruve
and a microscoop etc
now it is only some Wood parts left befor i can start to build etc a turnplatter made in thick 60 cm gerth
42 cm wide . a new motor whithe gear box to drive the scruve
and a microscoop etc
You do not have the required permissions to view the files attached to this post.
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
a verry good book that im soon have !!! cant wait for it
and a rec o kut turntable for my projekt
and a rec o kut turntable for my projekt
You do not have the required permissions to view the files attached to this post.
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
hope that some wone can tipp me of a great pair of speakers that i can use as cutter head
or if ther is some one that have a old mono cuting head for sale i would love to buy it
best regards froam michael
or if ther is some one that have a old mono cuting head for sale i would love to buy it
best regards froam michael
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
some improvments on my old diy cutter
You do not have the required permissions to view the files attached to this post.
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
more pictures
You do not have the required permissions to view the files attached to this post.
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
some more things to my new lahte cutter projekt one electric power suplye for the dimond whithe difrent volt and amp you can control the heat wire preaty good and the second thing was a electric 230 to 110 transformer for the rec o kut motor
You do not have the required permissions to view the files attached to this post.
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
new pctures of my new Project lahte
You do not have the required permissions to view the files attached to this post.
- record cutter 76
- Posts: 72
- Joined: Sat Jul 14, 2012 10:07 am
- Location: tibro sweden
Re: My DIY Lathe Recorder Project
this maschine whil be better and hard to transport when its done
You do not have the required permissions to view the files attached to this post.