pretty proud of these

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
tragwag
Posts: 1263
Joined: Wed Jun 22, 2011 2:30 pm
Location: Providence, RI USA
Contact:
Contact tragwag

pretty proud of these

Post: # 33639Unread post tragwag
Thu Feb 12, 2015 2:21 pm

I've been doing color tinted lathe cuts recently, these came out great!
just wanted to share with the fellow trolls.
You do not have the required permissions to view the files attached to this post.
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
Top

Click Here!

User avatar
Jccc
Posts: 369
Joined: Tue Nov 20, 2007 10:15 am
Location: San Diablo California
Contact:
Contact Jccc

Re: pretty proud of these

Post: # 33640Unread post Jccc
Thu Feb 12, 2015 2:37 pm

Whoa! that's really cool! are you cutting/embossing onto that material? What kind of material is that?
Top
User avatar
tragwag
Posts: 1263
Joined: Wed Jun 22, 2011 2:30 pm
Location: Providence, RI USA
Contact:
Contact tragwag

Re: pretty proud of these

Post: # 33643Unread post tragwag
Thu Feb 12, 2015 6:22 pm

I'm embossing on polycarbonate. and the b sides are tinted with this special paint.
I paint the blank first, with the cutting side sheeting still on, then peel it off and cut!
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
Top
User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:
Contact opcode66

Re: pretty proud of these

Post: # 33644Unread post opcode66
Thu Feb 12, 2015 6:23 pm

Need man. Nice work.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Top
User avatar
FFrankensteinRecords
Posts: 43
Joined: Thu May 17, 2012 7:26 pm
Location: United States
Contact:
Contact FFrankensteinRecords

Re: pretty proud of these

Post: # 33696Unread post FFrankensteinRecords
Fri Feb 13, 2015 6:19 pm

Beautiful!
Are you painting these using some kind of dip painting with water or something?
I did a similar thing for RSD last year, only with screenprinting.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Jesus H Chrysler
Posts: 190
Joined: Sun Nov 26, 2006 12:03 am
Location: Asheville, NC

Re: pretty proud of these

Post: # 33700Unread post Jesus H Chrysler
Sat Feb 14, 2015 12:05 am

Nice job!
Top
Post Reply

Click Here!