microscope recomendations

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
uvoscillator
Posts: 129
Joined: Wed Aug 22, 2012 1:37 am
Location: Russia, St.Petersburg

microscope recomendations

Post: # 35223Unread post uvoscillator
Sun May 24, 2015 3:29 pm

dear trolls !
please drop some suggestions about best usable digital microscope that useful for groove measurements
and better to have video output on it for sure, usb is nice for sure, but better have both :roll:
hmm and may be suggestions for usable mounting for it ?? huh ? that's good enough :oops:
what magnification usually enough for inspection ?

many thanks

best

sergey
Best !

User avatar
uvoscillator
Posts: 129
Joined: Wed Aug 22, 2012 1:37 am
Location: Russia, St.Petersburg

Re: microscope recomendations

Post: # 35529Unread post uvoscillator
Sat Jun 13, 2015 3:34 am

:( noone? what are you using, guys ?
Best !

User avatar
studiorp
Posts: 761
Joined: Thu Nov 01, 2007 6:55 pm

Re: microscope recomendations

Post: # 35535Unread post studiorp
Sat Jun 13, 2015 10:13 am

Recently I had bought a microscope with option 35x and 125x with zoom.
I must still mount it on my machine, but I have seen that 125x is very good for grooves inspection. It can be used too for check the cutting stylus conditions.
Mine model have a video out rca from 75 ohm, no usb.
Cheers.

Post Reply