How I suppressed T560 mixer
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
How I suppressed T560 mixer
Hi all,
I'm a newbie here and I read a lot of good things on this great forum since a week.
I'm using the T560 since 7 years and it's a very good lathe.
However, I want to add my contribution and share how I removed the mediocre mixer of my T560 Vinyl Recorder.
For this, I'm using Hifi parts that I already have in my studio.
- RIAA pre amp Cambridge CP2
- Headphone amplifier Pro-Ject Head Box SE II
- Passive knob volume
- 3 way audio switch x2
Results : better sound, less background noise, I'm happy
I'm a newbie here and I read a lot of good things on this great forum since a week.
I'm using the T560 since 7 years and it's a very good lathe.
However, I want to add my contribution and share how I removed the mediocre mixer of my T560 Vinyl Recorder.
For this, I'm using Hifi parts that I already have in my studio.
- RIAA pre amp Cambridge CP2
- Headphone amplifier Pro-Ject Head Box SE II
- Passive knob volume
- 3 way audio switch x2
Results : better sound, less background noise, I'm happy
Re: How I suppressed T560 mixer
Hello
Thank you for sharing. I also have a t-560 since 2012 and one of the first improvements was to get rid of the cheap mixer
Best wishes!
Thank you for sharing. I also have a t-560 since 2012 and one of the first improvements was to get rid of the cheap mixer
Best wishes!
- summelumsen
- Posts: 1
- Joined: Fri Jan 26, 2024 8:04 am
Re: How I suppressed T560 mixer
Hi - Im pretty new to cutting and i just got the t-560 and im in doubt about the signal chain. Maybe you can help me?.
The doubt i have is if the vinyl optimizer should be before or after the (19" Main Unit with,RIAA encoder, Groove controller, Stylus heating regulation) before it goes on to the cutteramp.
Thanx in advance.
The doubt i have is if the vinyl optimizer should be before or after the (19" Main Unit with,RIAA encoder, Groove controller, Stylus heating regulation) before it goes on to the cutteramp.
Thanx in advance.
Re: How I suppressed T560 mixer
I changed to Mackie Big Knob (older version
With phono) and my cuts are the loudest and cleanest ever!
Bye bye red lining Souri mixer!
With phono) and my cuts are the loudest and cleanest ever!
Bye bye red lining Souri mixer!
Re: How I suppressed T560 mixer
yeah toss the mixer and the vinyl optimizer, do it in the box.
I go audio interface -> meter -> amp -> head
I go audio interface -> meter -> amp -> head
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com