A New Source for Blank Records

[fredbissnette]

sounds good ill keep an eye out for the mail lady

[fredbissnette]

Got my order I'll try em out tomorow and see what's up thanks again

[fredbissnette]

https://www.youtube.com/watch?v=xZ1ch4btvz4&t=5s
https://www.youtube.com/watch?v=__-wut49VH0
https://www.youtube.com/watch?v=3LfJyJhSbD8

[Oldskoolhousehead]

It would be great if you supplied solid and translucent colored blanks.

[soeffingodly]

These blanks work pretty dam well!

A bit more surface noise than traditional poly but I used the 2 blanks with Mikes sapphires and they sounded good. Definitely a viable solution in the states. Well done.

[aaron]

Still wondering how they work with diamonds. Anyone try it yet?

[BLANQ]

These blanks work pretty dam well!

A bit more surface noise than traditional poly but I used the 2 blanks with Mikes sapphires and they sounded good. Definitely a viable solution in the states. Well done.

Glad you got some good results! Blanqs are softer than poly, so you might need to back your weight off just a touch, and that surface noise you mentioned should be cleared up. We use Mike's cones at Leesta Vall as well, and are getting almost no surface noise at all. Take a listen to a few cuts we've posted on our IG Story here: https://www.instagram.com/stories/highlights/17915283718143732/

[soeffingodly]

These blanks work pretty dam well!

A bit more surface noise than traditional poly but I used the 2 blanks with Mikes sapphires and they sounded good. Definitely a viable solution in the states. Well done.

Glad you got some good results! Blanqs are softer than poly, so you might need to back your weight off just a touch, and that surface noise you mentioned should be cleared up. We use Mike's cones at Leesta Vall as well, and are getting almost no surface noise at all. Take a listen to a few cuts we've posted on our IG Story here: https://www.instagram.com/stories/highlights/17915283718143732/

I only had 2 so I didn't get a chance to really mess with dialing them in but they definitely cut well!

Thanks for the tips!

[aaron]

I tried cutting these with a diamond, worked great! Swarf looked the same as Myshank blanks, and noise floor seemed the same. Good job!

[BLANQ]

I tried cutting these with a diamond, worked great! Swarf looked the same as Myshank blanks, and noise floor seemed the same. Good job!

Wonderful news, thanks Aaron!

[aaron]

Just to be fair, my method was totally not scientific and I compared to a black Myshank blank. Also, I have no idea of stylus life.

[fredbissnette]

These are fantastic for embossing
https://youtu.be/scqRogHMrQI

[LennonG]

Any update on blank or different colour blanqs?

[piaptk]

Any update on blank or different colour blanqs?

If you are embossing, I sell White, Black, Smokey Grey and Translucent Blue polycarb. They are no good for diamond cutting, though.

[LennonG]

If you are embossing, I sell White, Black, Smokey Grey and Translucent Blue polycarb. They are no good for diamond cutting, though.

Do you have 5" record blanks?

[kafkablues]

Have I missed the boat on these free samples?