T560 vacuum lid replacement
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
T560 vacuum lid replacement
Hello I’ve had to replace the lid after 7 years of use.
Looked around everywhere and found the following, which looks great upgrade in wood.
Kmart $4!
Hope this helps someone on here out.. you’ve all helped so much!
Looked around everywhere and found the following, which looks great upgrade in wood.
Kmart $4!
Hope this helps someone on here out.. you’ve all helped so much!
You do not have the required permissions to view the files attached to this post.
Re: T560 vacuum lid replacement
have a look here:
https://gies.de/katalog/giesline/vorratsdose-rund/ (site in German only)
This is the original lid that came with the VR. Costs around EUR 4.-
Haven‘t found this product in a (online-)shop. Made a call to a very friendly person from the „Verkauf“ team and she was so kind to arrange the shippment of 3 „Vorratsdose Rund“.
Hope that helps.
https://gies.de/katalog/giesline/vorratsdose-rund/ (site in German only)
This is the original lid that came with the VR. Costs around EUR 4.-
Haven‘t found this product in a (online-)shop. Made a call to a very friendly person from the „Verkauf“ team and she was so kind to arrange the shippment of 3 „Vorratsdose Rund“.
Hope that helps.
- RedSpadeRobyn
- Posts: 25
- Joined: Sat Dec 16, 2017 2:55 pm
Re: T560 vacuum lid replacement
I had to replace mine too, but I just asked Souri to send me a new one. And he did.
That wood one looks sharp though!
That wood one looks sharp though!
Re: T560 vacuum lid replacement
thank you for this! I'm keeping track of as much of the second hand replacement stuff for the VR that I can,
as a second hand user with two VRs my numbers gonna come up with all of these parts some time
as a second hand user with two VRs my numbers gonna come up with all of these parts some time
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
Re: T560 vacuum lid replacement
Hey does anyone know where i can get a LID replacement in EUROPE ? Is kind of urgent
mine can't be glued anymore.
mine can't be glued anymore.
Re: T560 vacuum lid replacement
Did you try buying from Souri?
Once the gargoyle had withdrawn and unlatched his suckers from the topside of Tremdall's agonizing torso, a profound slumber would overtake him, as though from the labor of many days.
Re: T560 vacuum lid replacement
i need an alternative.
Re: T560 vacuum lid replacement
Once the gargoyle had withdrawn and unlatched his suckers from the topside of Tremdall's agonizing torso, a profound slumber would overtake him, as though from the labor of many days.
Re: T560 vacuum lid replacement
I just got a couple of bits of scrap plywood, drunkenly cut them vaguely circular with a jigsaw, screwed them together with some thin rubber inbetween to seal against the rim of the jar and drilled a couple of holes in. It looks absolutely awful but works fine, and there's no way it's going to break again (well, until the plastic jar itself gives up, that is). If you can't do this yourself you're likely to know someone who can, and probably better than me.
You do not have the required permissions to view the files attached to this post.
Re: T560 vacuum lid replacement
Thank you mate