Grampian type C - Connecting wires

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
mischmerz
Posts: 273
Joined: Thu Jul 02, 2015 8:23 pm
Location: Houston. Tx
Contact:
Contact mischmerz

Grampian type C - Connecting wires

Post: # 60538Unread post mischmerz
Mon Apr 04, 2022 3:16 pm

I am rebuilding my lathe and don't remember how to connect the wires back to the cutting head. Can anybody please give me a hint?
You do not have the required permissions to view the files attached to this post.
Top

Click Here!

User avatar
dubcutter89
Posts: 360
Joined: Thu Oct 19, 2006 6:30 am
Location: between the grooves..

Re: Grampian type C - Connecting wires

Post: # 60540Unread post dubcutter89
Tue Apr 05, 2022 3:41 am

Hi Michaela!

Not critical with the type C as it is non feedback.
Just screw back in the 2 wires from the amp into the the 2 terminals at the back of the head (screws from top I think...)
In the perfect universe you want to check the absolute phase of the system, depends on how critical you are...

Hope that helps!
Lukas
Wanted: ANYTHING ORTOFON related to cutting...thx
Top
Post Reply

Click Here!