T560 cutting at 78T with SL1200GR

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
Sylvere
Posts: 65
Joined: Tue Dec 15, 2020 2:02 pm
Contact:
Contact Sylvere

T560 cutting at 78T with SL1200GR

Post: # 61159Unread post Sylvere
Tue Jul 19, 2022 4:53 am

hi,
anyboby ever try to cut 10'' at 78T with vr t560 and SL1200GR ?
what's about your results ?
thanks
syl
Top

Click Here!

User avatar
Dub Studio
Posts: 221
Joined: Tue Jun 20, 2006 9:41 am
Location: Bristol
Contact:
Contact Dub Studio

Re: T560 cutting at 78T with SL1200GR

Post: # 61191Unread post Dub Studio
Sat Jul 23, 2022 2:41 pm

I used an SL1200MK4 a few times... it was pretty terrifying. Everthing happens so much faster! I don't recommend cutting at 78rpm, just cut at 45 or 33 and do the maths on the sample rates.
Top
Post Reply

Click Here!