18th Anniversary! Please help keep this site alive.

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
Steve E.
Site Admin
Posts: 1938
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

18th Anniversary! Please help keep this site alive.

Post: # 63081Unread post Steve E.
Sat Jul 01, 2023 2:43 am

Short version: 

This is a fundraising letter. Click here to contribute and help keep the Lathe Trolls site running.  You will be thanked on the "Our Sponsors" page.  And THANK YOU for your prior contributions!!  They are the reason the site has remained until now.  

Now, the standard long-playing version:


Dear Reader.

This year's Lathe Trolls fundraiser is named in honor of Mamie Smith's musical and historic contributions. Have you ever heard Ms. Smith's "Crazy Blues"?  Recorded in August 1920, it was a massive smash hit, and ushered in an era of what were called "race records". After some 25 years, the American recording industry had finally realized that they'd been ignoring a massive African American market.  They may not have realized they'd also been ignoring recording a whole lot of great, potentially timeless music that went along with that market, much of which, prior to 1920, is therefore lost to time.  Anyway, check it out.  It's a beautiful performance by both singer and band.  It's also a marvel of pre-electronic horn recording technique. 


And here we are, 103 years later.  You are a participant in the community that captures and preserves the sounds of today, in much the same way.  We've just refined the process a bit.

As you know, The Secret Society of Lathe Trolls is the grassroots worldwide chat forum devoted to all aspects of record cutting and pressing, professional and experimental.  The forum quietly celebrated its 18th anniversary on June 24--a week ago.

I'm calling on all visible active site members, as well as on quiet lurkers: If this site has enriched your life, please contribute now to our 18th anniversary fundraiser.  It will allow me, the admin of the site, to continue to serve you behind the scenes, and to pay the site's service expenses.  Details of what your contribution supports are further down the page.

The most urgent part of the message follows directly.  The rest is what amounts to our annual report (which is much like last year's).

Can I count on your contribution?

Please contribute now to keep the Lathe Trolls site running.

Clicking this golden PayPal "Contribute" link, here, or as a button on any page of www.lathetrolls.com, will allow you to enter any amount you'd like to give (one time, or monthly), by card or Paypal. Or, use a PayPal app to send to lathetrolls@gmail.com. Please email or include a note to help me link/credit your username correctly on the "Our Sponsors" page.  (The page will read "Doc Wurly." That's me:  I repair Wurlitzer Electric Pianos from my Brooklyn apartment, while I'm not rewiring the site.)

All contributions fund our hosting and domain expenses, and support my labor keeping the site operational.

A contribution of $20 USD will make a big difference. Smaller amounts ($16.66 or $7.80, for example) will add up, as long as everyone pulls their weight. If your business income or most meaningful hobby depends on the site, please consider more: $33.33 USD is a magic number. For donations of $45 or more, you can customize your link, and also have it connect to a webpage outside the Lathe Trolls site. Banner ads are available for $78 on up--email me for details, or read this link. A checkmark at the Paypal page gives you the option of making a monthly contribution, too. (This is a great option if your cash flow is low and your allegiance is high). Your giving will keep this community, and this vital database of record-cutting knowledge, alive.

As you know, this one-of-a-kind site runs without major support. We don’t have fees: neither for membership, nor even, as of now, for the "Classifieds & Tip-offs" section listings. All we have are your friends and you: quirky brilliant individuals; proprietors of niche businesses; expert operators of mastering and pressing equipment; researchers; vinyl fanatics, and/or and/or professional and home tinkerers and inventors. You are the Lathe Trolls. You make the site worth visiting. I, with your help, and with the generous volunteer efforts of our moderators, keep it functioning.

This administration is generally performed and/or refereed by this one guy writing you: a freelance musician, Wurlitzer Electric Piano repairman, and audio editor living in Brooklyn. Ironically, I am not a professional record-cutter.  I started this site in June 2005 as a newbie, dissatisfied with the information available to me at the time. (To some degree, I have remained a newbie!) Running the site takes diplomacy, triage, care, some tech skill, and both empathy and a thick skin.

The recent duration in review

Heck.  Why don't you tell me: How has this year been for you?  We are three years post-Apollo-calypse, and in my hometown of New York, at least, it seems like something a bit like "normal" is starting to emerge from the pandemic era. Some of you in Europe and elsewhere may not be feeling such normalcy, in wartime, forest fires, or otherwise.

Throughout this time, it is my hope that the community at Lathe Trolls has been a source of strength, support and enjoyable distraction. The site intends to continue for the foreseeable future-- as long as its members can chip in and support its operating expenses.

Good stuff you already know:

You are using the site, or you have enjoyed it at any point in the past 18 years, as an enthusiastic sharer or lurker; as a giver or consumer of knowledge and equipment, related to the making of old-fashioned grooved records.
LatheTrolls.com enables the passing on of record-creating knowledge and experience that had been on the verge of being lost.
  • It encourages innovation, while aiding in the salvage and repair of irreplaceable older equipment.
  • It showcases vinyl art.
  • It singularly promotes businesses in this reviving industry, offers problem-solving data and schematics for everything from old home units, to Neumann VMS-80s, to the new exciting record cutting and pressing solutions.
  • It helps sellers and buyers of equipment--both common and unobtanium-- find each other.
  • It is a unique, invaluable, deep, massive, sprawling database of the world's living knowledge of record-cutting and record-pressing.
  • Its users volunteer, daily, to solve the most maddening of technical problems.
  • It connects record-making professionals, living engineering legends, and hobbyists on every continent on the planet. And...
  • It's fun!
Your contribution will fund specifically:
  • Domain and hosting related service expenses, including backup services, and advanced firewall services to block Denial of Service (DDoS) attacks. These expenses have crept up in recent years. Two years ago, swarms of bots caused the site to go down several times, and I've had to employ a cybersecurity service since then to block them.
  • My work on the site, which is time-consuming. It is a labor of love, but it still needs funding to happen. I manually approve every new user; over 900 users over the past two years, totaling 5118 active memberships. I also deal with forgotten passwords, requests to edit posts or update image links, and the occasional offstage or onstage drama. Maintaining additional manual backups of the whole site.
  • I must keep the site software up-to-date to function with the latest server requirements. Every couple of years, I have to reprogram the site more-or-less from scratch, and migrate the old data to a new shell, just to keep it looking and operating the same with evolving server software upgrades.
  • Remember all those site outages of two years ago?  Through software maintenance and a gauntlet I ran through at that time, I've done my best to keep ahead of such glitches this year, and to keep things running more smoothly.  Knock wood, I hope this continues.  All of this takes time, smart decision making, and a lot of effort.
Your contribution literally allows the site to continue to function.

I regret that since this is such a manual operation, I have not always followed through efficiently with the individual "Thank you" mail message that you deserve--even though, I am loudly thanking you over here when your contribution arrives.

What I DO do, though, is thank all sponsors and financial supporters of the site on the "Our Sponsors" page, accessible on a button at the top of the page. (Check it out!) At the time of new fundraisers, I archive older sponsorships, but they remain readable by links. Your support is memorialized permanently.

Contributions from January forward are included in the current Mamie Smith Fundraising Drive. (They have been updated as of June 28th.)

Thanks for your ongoing support.

Yours in all peaceful revolutions,

Steve E.
Administrator
The Secret Society of Lathe Trolls

PS. Please share this link on the social media of your choice. Spread the word!

https://www.lathetrolls.com/fundraiser

Image
Pictured above:Mamie Smith and her Jazz Hounds

User avatar
Steve E.
Site Admin
Posts: 1938
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63110Unread post Steve E.
Mon Jul 10, 2023 12:35 pm

THANK YOU to all who have contributed already! The Sponsor page will be updated in a few days to reflect all the generous contributions. They TRULY HELP to keep the site alive.

User avatar
LLV
Posts: 1
Joined: Sat Jul 23, 2022 1:46 pm

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63114Unread post LLV
Tue Jul 11, 2023 1:19 pm

Steve, a hearty congratulations on the 18th Anniversary of Lathe Trolls, and thank you... your efforts are greatly appreciated. You should be very proud.
We take anniversaries very seriously... 2023 is the 44th Anniversary of the introduction of the Cybersonics lathe!
(Donation submitted via P/P, Transaction ID ending in ...8014K)

User avatar
Steve E.
Site Admin
Posts: 1938
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63129Unread post Steve E.
Sat Jul 15, 2023 3:47 pm

I've updated the Sponsor page. Thanks to all who have contributed so far! We've had 5.5% participation of all who have logged on in the past 12 months. Can we get that number up to..... 33 1/3%? Even small contributions add up and help keep us afloat.

User avatar
Steve E.
Site Admin
Posts: 1938
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63181Unread post Steve E.
Mon Jul 31, 2023 10:45 pm

I've once again updated the Sponsor page. Thanks again to all of our stellar sponsors. Please make sure you are listed correctly. If I missed linking to your site (contributions of $45 or more), please let me know.

We've now had 7% participation of all who have logged on in the past 12 months. Ok, if 33 1/3% is too ambitious..... how about we get participation in this fundraiser up to 16 2/3%? That's still a legitimate RPM.

Again, even small contributions add up and help keep us afloat.

User avatar
Steve E.
Site Admin
Posts: 1938
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63284Unread post Steve E.
Thu Aug 31, 2023 10:26 am

We've now had 8.3% participation of all who have logged in since July 1, 2022 (in other words, the past 14 months, or a year before this drive started). We're about halfway to our 16.66% goal! Can you help?

Again, even small contributions add up and help keep us afloat.

I've once again updated the Our Sponsors page. Thanks again to all of our fantastic sponsors.

Please make sure you are listed correctly. If I missed linking to your requested site (contributions of $45 or more in this calendar year), please let me know.

User avatar
trendkiller
Posts: 36
Joined: Fri Jan 25, 2019 1:18 pm
Location: Houston, TX - U.S.A.

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63286Unread post trendkiller
Thu Aug 31, 2023 11:25 am

Contributions link isn't working.

User avatar
Steve E.
Site Admin
Posts: 1938
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63288Unread post Steve E.
Thu Aug 31, 2023 4:09 pm

Thank you! Please try again. I think I fixed it.

User avatar
trendkiller
Posts: 36
Joined: Fri Jan 25, 2019 1:18 pm
Location: Houston, TX - U.S.A.

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63292Unread post trendkiller
Sat Sep 02, 2023 2:06 pm

Done.

User avatar
Steve E.
Site Admin
Posts: 1938
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63293Unread post Steve E.
Sat Sep 02, 2023 3:30 pm

Thank you! And thank you all!

User avatar
Steve E.
Site Admin
Posts: 1938
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: 18th Anniversary! Please help keep this site alive.

Post: # 63315Unread post Steve E.
Fri Sep 08, 2023 12:25 pm

Sponsor page updated! thanks all. Grateful.

Post Reply