Wanted To Buy : Extruder.
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Wanted To Buy : Extruder.
Hello everyone.
We are looking for an extruder grain vinyl for our manual presses.
Feel free to contact us.
Regards.
We are looking for an extruder grain vinyl for our manual presses.
Feel free to contact us.
Regards.
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Hello and thank you for your messsage and your advice!
We bought a hand press Toolex and two manual presses that I know the brand.
We also have a VS60 Neumann, plating bath, all the material to make labels and a cutter to form the cover.
We are full installation of all equipment.
Before we worked as brooker, we realized only cutting.
Familiarized yourself enterprise that performs to extrude the plastics industry?
Regards.
We bought a hand press Toolex and two manual presses that I know the brand.
We also have a VS60 Neumann, plating bath, all the material to make labels and a cutter to form the cover.
We are full installation of all equipment.
Before we worked as brooker, we realized only cutting.
Familiarized yourself enterprise that performs to extrude the plastics industry?
Regards.
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Yes, VMS62 ... I am not an expert nominated equipment ... As long as the machine comes out of good lakes!
Sorry for my very bad English ... I go through a computer translator.
My request is that I'm looking for an extruder for my two manual presses.
Do you have an address of these companies realize that yet?
Regards.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Sorry for my very bad English ... I go through a computer translator.
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
My request is that I'm looking for an extruder for my two manual presses.
Do you have an address of these companies realize that yet?
Regards.
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
That is the website for a company that sells used machines. http://www.resale.de/
You will find many companies like this in France.
You will find many companies like this in France.
Look here
http://shop.ebay.de/i.html?_from=R40&_trksid=m570&_nkw=Spritzeinheit
Most likely best unit for you there is this
http://cgi.ebay.de/Arburg-komplette-Spritzeinheit-350-40er-Schnecke-/360189491780?pt=Kunststoffe_Chemie&hash=item53dcf77a44
Need hydraulics to drive it and keep the injection part fixed so it acts like an extruder rather than a combined extruder injector
Else
look here for a piece of Chinese junk
http://cgi.ebay.de/Extruder-Extrusion-Line-for-PVC-ABS-profiles-JWSML45-26-/200402868311?pt=Kunststoffe_Chemie&hash=item2ea8f11857
Either one would need some kind of puck former not hard to knock up
Now you can go for it my French friend and welcome to the exclusive club of suffering for your art
Cheers
http://shop.ebay.de/i.html?_from=R40&_trksid=m570&_nkw=Spritzeinheit
Most likely best unit for you there is this
http://cgi.ebay.de/Arburg-komplette-Spritzeinheit-350-40er-Schnecke-/360189491780?pt=Kunststoffe_Chemie&hash=item53dcf77a44
Need hydraulics to drive it and keep the injection part fixed so it acts like an extruder rather than a combined extruder injector
Else
look here for a piece of Chinese junk
http://cgi.ebay.de/Extruder-Extrusion-Line-for-PVC-ABS-profiles-JWSML45-26-/200402868311?pt=Kunststoffe_Chemie&hash=item2ea8f11857
Either one would need some kind of puck former not hard to knock up
Now you can go for it my French friend and welcome to the exclusive club of suffering for your art
Cheers
Chris
No modifications necessary mate
Just lock the injection barrel
If half smart you can make the puck by injecting in the cake former
If you have enough cooling it would speed up things quite a lot
Any way the guy asking is suffering from A B syndrome
He does not know the difference between his ass and his elbow when it comes to record pressing so no point in elaborating on this fine little improvement as things stand
Really he needs to visit a plant and spend some time there so he can see for himself what the real situation is
We had some Spanish people visiting Italy after a lot of hot post in here But I think they went quite after seeing what it takes to press a record
Well may be I am wrong and there would be a plant in Spain and one in Portygal I am told
Great to see on on Norway
Only time will tell as well as a lot of money
Cheers
Just lock the injection barrel
If half smart you can make the puck by injecting in the cake former
If you have enough cooling it would speed up things quite a lot
Any way the guy asking is suffering from A B syndrome
He does not know the difference between his ass and his elbow when it comes to record pressing so no point in elaborating on this fine little improvement as things stand
Really he needs to visit a plant and spend some time there so he can see for himself what the real situation is
We had some Spanish people visiting Italy after a lot of hot post in here But I think they went quite after seeing what it takes to press a record
Well may be I am wrong and there would be a plant in Spain and one in Portygal I am told
Great to see on on Norway
Only time will tell as well as a lot of money
Cheers
Chris
ha ha
mossy:yes, if you want visit munich, here we have LOT of good beer, in big cans.... as everybody knows![Smile :)](./images/smilies/icon_smile.gif)
have a look at the historic production at "Augustiner Bräu", some people
say, this is the best beer in bavaria...
http://www.augustiner-braeu.de/augustiners/html/en/Historische_Aufnahmen.html
mossy:yes, if you want visit munich, here we have LOT of good beer, in big cans.... as everybody knows
![Smile :)](./images/smilies/icon_smile.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
have a look at the historic production at "Augustiner Bräu", some people
say, this is the best beer in bavaria...
http://www.augustiner-braeu.de/augustiners/html/en/Historische_Aufnahmen.html