Spray booth for silvering
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- meyer.jon1988
- Posts: 3
- Joined: Tue Jan 16, 2018 9:46 pm
Spray booth for silvering
My interest in vinyl production is on the galvanic end. I've been trying to find some leads on a silvering booth (preferably one with an automated spinning plate) and while I've seen videos of them, I'm having a hard time finding any for sell. Does anyone know where I can start. I'm looking for new and used.
- Aussie0zborn
- Posts: 1827
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: Spray booth for silvering
You can easily make one.
Spinning turntable at 45 degree angle, motor at 78rpm (variable speed could be handy), a double nozzle spray gun, a sink, a cabinet, some fume extraction and you're good to go. Think about where the water will drain to.
Spinning turntable at 45 degree angle, motor at 78rpm (variable speed could be handy), a double nozzle spray gun, a sink, a cabinet, some fume extraction and you're good to go. Think about where the water will drain to.
- meyer.jon1988
- Posts: 3
- Joined: Tue Jan 16, 2018 9:46 pm
Re: Spray booth for silvering
I have looked into making one myself. However, I was trying to find one that would spray itself.
Thanks
Thanks
Re: Spray booth for silvering
Have you seen this? http://platingpower.com/vinyl-record-plating/