Weight of stamper
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Weight of stamper
Hey guys just a quick question. What is the typical weight of a 7" (10" to be accurate) stamper when it comes off the laquer?
Cheers
Cheers
Re: Weight of stamper
Anyone at all. Dont be shy now.
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: Weight of stamper
EMI Greece 12" stamper specification...
184.2 ~ 198.4 grams
A lighter stamper will give you a faster cycle time but if the nickel is stressed and not ductile it will fail sooner than a heavier stamper will fail. Failiure = the outside edge of the stamper cracks along the gate of the mould.
184.2 ~ 198.4 grams
A lighter stamper will give you a faster cycle time but if the nickel is stressed and not ductile it will fail sooner than a heavier stamper will fail. Failiure = the outside edge of the stamper cracks along the gate of the mould.
Re: Weight of stamper
Cheers man. So does this translate to 152gm - 164gm for a 10" laquer?
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: Weight of stamper
I haven't calculated it but it seems you have. That would be a good starting point and might be right on the mark.