- dietrich10
- Posts: 841
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact:
How many hours you getting out of cutting styli?
I use until sonic or eye issue detected. not sure I ever make it 20 hours of use.
Latest one lasted just under 10 hours. there was something on a test cut lacquer that messed it up. first time ever had that happen
Latest one lasted just under 10 hours. there was something on a test cut lacquer that messed it up. first time ever had that happen
cutting lacquers-vms70 system
- concretecowboy71
- Posts: 569
- Joined: Mon Mar 08, 2010 10:13 am
- Location: Cleveland, Ohio, USA
- Contact:
What do you hear sonically that make you reject a stylus?
I have been surprised at how long my styli have been lasting. More than 10 hours for sure.
When some of mine went bad, I heard some light static/noise in the cuts. What else should I be look for?
When my grooves stop being nice and sharp looking under the scope, that is when I change my stylus.
I am still pretty new, so I could be way wrong also!
I have been surprised at how long my styli have been lasting. More than 10 hours for sure.
When some of mine went bad, I heard some light static/noise in the cuts. What else should I be look for?
When my grooves stop being nice and sharp looking under the scope, that is when I change my stylus.
I am still pretty new, so I could be way wrong also!
Cutting Masters in Bristol,Virginia, USA
Well Made Music / Gotta Groove Records
Well Made Music / Gotta Groove Records
- dietrich10
- Posts: 841
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact: