Who can help me with my VR T560 cutterhead?

[sakuszi]

https://www.youtube.com/watch?v=tAfAsSTl3Ug

[aaron]

Are you having to dip the cones multiple times in resin? I did one dip and they're still very flexible

[juba bc]

why not use aluminum beer cans ?

[sakuszi]

Best cones are made of brass, brass transfers vibrations very well, the head will ring bells
video 9:40 https://www.youtube.com/watch?v=HhFhaE6WE3c

[Fatrecco]

I don't know where it's from.

audiobunnies.jpg

You people get good results. I'm searching for a good saphire stylus too.

fat

[Snug Music]

I don't know where it's from.

audiobunnies.jpg

You people get good results. I'm searching for a good saphire stylus too.

fat

Hehee...

[Snug Music]

Are you having to dip the cones multiple times in resin? I did one dip and they're still very flexible

hey,..
have u done the cone?
it´s alright?
the suspense will kill me...

regards Scotty

[aaron]

I dipped them once, they're still very flexible. It got cold outside, and I've been doing it in the garage because the resin smells so bad... So I'm waiting for it to warm up a little. I guess I need to dip again. How many times did you dip it?

[Snug Music]

I dipped them once, they're still very flexible. It got cold outside, and I've been doing it in the garage because the resin smells so bad... So I'm waiting for it to warm up a little. I guess I need to dip again. How many times did you dip it?

Dipped 1X in 2k Epoxy Resin...and wait, 3 hours..thats it!

Do you have the harder with pure mixed ?? otherwise can not do that !. 2K, epoxy resin !!!!

best regards
Scotty

[aaron]

I actually used polyester resin, which is what you recommended earlier in the thread.

[sakuszi]

Snug Music , look , test head speacker 200W test burning coil drive 5 sec 1A ,minute 1:20 , smoke from the coil https://www.youtube.com/watch?v=e_6Cesg6oTM&feature=youtu.be

[cosmO_O]

Can somebody make a new upload about the first 30 high res pic, please! Thank you guys!!!

I think i'm the first person with this little surprise, but here are 30 pictures from the VR cutterhead while it's open

A few days ago i open the cutterhead from the Vinylrecorder, and after that i made 30 pictures.

This link from Wetransfer, is working until 30 december 2015, and please let me know what you think of the tweeters

Marc

Link to Wetransfer: https://www.wetransfer.com/downloads/4bb30f65c848a4c65c7e5ae6acf2fa2320151223204543/8e8688a35ba4329622c7c0aa7d724ba920151223204543/6930e4

[Snug Music]

Can somebody make a new upload about the first 30 high res pic, please! Thank you guys!!!

I think i'm the first person with this little surprise, but here are 30 pictures from the VR cutterhead while it's open

A few days ago i open the cutterhead from the Vinylrecorder, and after that i made 30 pictures.

This link from Wetransfer, is working until 30 december 2015, and please let me know what you think of the tweeters

Marc

Link to Wetransfer: https://www.wetransfer.com/downloads/4bb30f65c848a4c65c7e5ae6acf2fa2320151223204543/8e8688a35ba4329622c7c0aa7d724ba920151223204543/6930e4

here is it!

http://we.tl/d16fceADe3

[Thelurker]

Hey Scott

Have you tried the Diamond Audio yet?

[sakuszi]

Hey Scott

Have you tried the Diamond Audio yet?

http://www.lathetrolls.com/viewtopic.php?f=1&t=2715

[Snug Music]

d6 diamond audio

NO!!!

Before i change the d6 tweeters to the head, i will make a other test with "SINUSLINE CAR TWEETERS", they have a metal-housing for better Resonanz.
I found it last days by my electronic-dialer.
They have a pretty good frequency response!!!

Updates follow this day.....stay tuned!

Scotty

[sakuszi]

well
I am currently working now on the head of a super , very very fast, the frequency response of 15Hz to 25kHz , metal head, similar to JVC, fire and smoke! I have a friend who has a precision CNC machine, my friend also watches, repairs, he told me this week will do me the head of my project, no problem. It will be riding so I think https://www.youtube.com/watch?v=VeIaBFqH4yE&feature=youtu.be

[Snug Music]

Here a little update

Driver (Tweeter) = Sinuslive NEO25s

i have make a new centerholder and change the head
new cones new headhousing and other parts.

cone is papercone 26mm x 20mm-High,.. glued and overglued completly with superglue and than i dipped in 2k epoxy-resin.
Rods are 1,2mm Brass
Centerholder works absolutly perfect!!!

20160329_193223.jpg

20160329_193418.jpg

20160329_164209.jpg

[Snug Music]

20160329_193439.jpg

20160329_164125.jpg

20160329_164146.jpg

thats for tonight..

stay tuned...

regards Scotty

[Snug Music]

our selfmade custom blanks

20160330_000159.jpg

20160330_000414.jpg