A forum devoted to record-cutting deviants, renegades, professionals & experimenters.
Sillitoe wrote:Update http://www.lathetrolls.com/viewtopic.php?f=15&t=5470&start=20 you're welcome
I coded a pitch controller using an arduino wired to a L298N motor driver shield.
The code is designed for a DC motor using PWM.
It uses also midi signals with added midi to usb dongle (the module can be used with buttons only without midi if you don't need it)
You will need to modify values to adapt them to your own motor (variables mentioned from line 10 to 18) I use a MFA DC Motor
buttons wiring is described from line 21 to 26.
Information are sent to a small 0.96" oled screen (problably a bit too small)
I did not uploaded the schematic of the arduino to the L298N shield because of my laziness coupled to a lack of time but it is pretty much standard....
If people ask for it I can consider moving my ass and use Fritzing
for midi implementation, I used this method : http://www.instructables.com/id/Send-and-Receive-MIDI-with-Arduino/
Users browsing this forum: wjh and 6 guests