Who can help me with my VR T560 cutterhead?

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41231Unread post Snug Music
Thu Mar 10, 2016 5:07 pm

cosmO_O wrote:
sakuszi wrote:
this for Sakuszi... :lol: :lol:
hey Cosmo,.


you I have laughed so much just about your video for Saku, .. :lol: :lol:
Wonderful!!
I rolled on the floor in front of laughing, now I got out of sheer laugh abdominal pain. thanks to you ... Cosmo hahaa :lol: :lol: :lol: :mrgreen: :mrgreen: :mrgreen:

ok .. joking aside.
very good work!
Brilliant!!!

Cheers Scotty :mrgreen: 8) :wink:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top

Click Here!

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41232Unread post sakuszi
Thu Mar 10, 2016 5:14 pm

SMusic yeeesssss ! :mrgreen: :mrgreen: :mrgreen: :D
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41233Unread post Snug Music
Thu Mar 10, 2016 5:16 pm

Casanova wrote:Hi cosmO_O, I have some questions for you.
Where does the sapphire stylus come from? Where can I buy a good and cheap one for testing?
What are those "cones" behind the drivers, connected by the 2 rods? I know they should have the same function they have in Sauri's vinylrecord, but I figure out what they exactly do.
Are your left driver connections inverted?

Thanks.
Keep up the good work.
hey Casanova,..

the cones are for geometric,..like a torque tube!
that hold that in position!

cheers Scotty 8)
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41234Unread post sakuszi
Thu Mar 10, 2016 5:19 pm

greetings gentlemen :)
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41236Unread post Snug Music
Thu Mar 10, 2016 7:29 pm

sekt.jpg
Happyy Cutting...Cheers"

hey CosmO_O, then let us both now all drink out the good result a champagne.
cheers
Hey Bryan, thanks for the flowers, you also get a champagne!
Cheers
Sakuszi gets milk!
alpenmilch.jpg
Was fun, also get a champagne ... :mrgreen: :mrgreen: :wink: :wink: CHEERS

Scotty 8) :wink:
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
Thelurker
Posts: 88
Joined: Mon Dec 08, 2014 1:15 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41258Unread post Thelurker
Fri Mar 11, 2016 7:06 pm

Good work both you guys!

Which tweeters if you both use?
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41259Unread post Snug Music
Fri Mar 11, 2016 7:13 pm

20160310_145947.jpg
20160310_150204.jpg
20160310_150030.jpg
20160310_150046.jpg
Here are some impressions of our daily work. Is a bit messy, :oops: but are still in the planning as where everything is available.

regards Scotty 8) :wink:
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41260Unread post Snug Music
Fri Mar 11, 2016 7:27 pm

Thelurker wrote:Good work both you guys!

Which tweeters if you both use?
PHONOCAR DOME TWEETER / Pro-Tech 2/419

But be very careful when Modifies this !!!
Since you have to watch properly, the glue for Cones not allowed to the suspension. Otherwise, the driver scrap !!!
20160229_125009.jpg
20160207_153743.jpg
20160229_124630.jpg
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
EpicenterBryan
Posts: 738
Joined: Sun Aug 10, 2014 9:01 pm
Location: Eugene, OR USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 41261Unread post EpicenterBryan
Fri Mar 11, 2016 11:55 pm

Snug Music wrote:DYI Centerholder for Cone
Right on! A smart monkey making a tool to get a banana. I love seeing how people are making things needed to make things... Did I just repeat myself?

Hey, nice digs you have there Scotty! It was fun seeing your space and hearing your voice in the last video.

Bryan
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41263Unread post sakuszi
Sat Mar 12, 2016 5:08 am

Deutschland, Deutschland über alles ! :D :D :D 8)
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41268Unread post Snug Music
Sat Mar 12, 2016 1:56 pm

sakuszi wrote:Deutschland, Deutschland über alles ! :D :D :D 8)
:shock:
:shock: :?: :?: :?:

Hey Saku, it is ok, when u like germany, but over all??
In moment, germany is very bad & uncool!!!

I like USA, theres a better place for musicans and Engeneers.

I make my music, liveacts and cutting vinyl...thats it!
;)
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
aaron
Posts: 203
Joined: Sun Sep 04, 2005 4:51 pm
Location: USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 41269Unread post aaron
Sat Mar 12, 2016 2:18 pm

Cones drying after a dip in some polyester resin
image.jpeg
It's slow going for me, I've had problems making nice cones out of paper
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Thelurker
Posts: 88
Joined: Mon Dec 08, 2014 1:15 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41270Unread post Thelurker
Sat Mar 12, 2016 3:33 pm

Cones are looking good! It may sound obvious but what shape do you draw to cut out to get the cone perfect?
Top
User avatar
aaron
Posts: 203
Joined: Sun Sep 04, 2005 4:51 pm
Location: USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 41271Unread post aaron
Sat Mar 12, 2016 3:44 pm

I generated the attached PDF from this website: http://www.wegmuller.org/cones/
cone.pdf (1).pdf
You do not have the required permissions to view the files attached to this post.
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41272Unread post sakuszi
Sat Mar 12, 2016 5:04 pm

Hey Saku, it is ok,
Snug Music , this is a very pretty melody 1841 Joseph Haydn, I told you that I'm learning German, I learned by heart.
Deutsche Frauen, deutsche Treue,
deutscher Wein und deutscher Sang
Sollen in der Welt behalten
ihren alten schönen Klang,
Uns zu edler Tat begeistern
unser ganzes Leben lang.
Deutsche Frauen, deutsche Treue,
deutscher Wein und deutscher Sang! :)
Last edited by sakuszi on Sat Mar 12, 2016 5:11 pm, edited 1 time in total.
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41273Unread post Snug Music
Sat Mar 12, 2016 5:06 pm

aaron wrote:I generated the attached PDF from this website: http://www.wegmuller.org/cones/
cone.pdf (1).pdf
hey aaron, I have the cone made from paper! Also, the program for the calculation I used. then cut, shaped and glued. Then stabilized with superglue and held on the form, then the Rod fixed with superglue. After he was well placed in the form, I have this then dipped in resin and allow to dry. that's it! 8) :wink:

Regards Scotty
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41274Unread post sakuszi
Sat Mar 12, 2016 5:29 pm

This is the last electronics module [tenth] of the control panel, I have not enough of ... :mrgreen:
You do not have the required permissions to view the files attached to this post.
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41275Unread post sakuszi
Sat Mar 12, 2016 7:03 pm

DMM Vinyl record vs diy record 5" Real :mrgreen:
https://www.youtube.com/watch?v=tnEwe74o7Yg
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41277Unread post sakuszi
Sat Mar 12, 2016 7:30 pm

my head and lamp, 150W metal halide 25kV
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41289Unread post Snug Music
Sun Mar 13, 2016 3:21 pm

FB_IMG_1457895249285.jpg
IMG_20160313_201311.jpg
Analog vs. Digital

:lol: :lol: :lol: :mrgreen:
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
Post Reply

Click Here!