Who can help me with my VR T560 cutterhead?

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41292Unread post sakuszi
Sun Mar 13, 2016 5:40 pm

https://www.youtube.com/watch?v=tAfAsSTl3Ug 8)
Top

Click Here!

User avatar
aaron
Posts: 203
Joined: Sun Sep 04, 2005 4:51 pm
Location: USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 41295Unread post aaron
Sun Mar 13, 2016 8:51 pm

Are you having to dip the cones multiple times in resin? I did one dip and they're still very flexible
Top
User avatar
juba bc
Posts: 71
Joined: Thu Nov 06, 2014 8:58 am
Location: Brazil

Re: Who can help me with my VR T560 cutterhead?

Post: # 41296Unread post juba bc
Sun Mar 13, 2016 9:54 pm

why not use aluminum beer cans ?
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41298Unread post sakuszi
Mon Mar 14, 2016 1:50 am

Best cones are made of brass, brass transfers vibrations very well, the head will ring bells
video 9:40 https://www.youtube.com/watch?v=HhFhaE6WE3c 8)
Top
User avatar
Fatrecco
Posts: 58
Joined: Wed Aug 12, 2015 2:22 pm
Location: germany

Re: Who can help me with my VR T560 cutterhead?

Post: # 41300Unread post Fatrecco
Mon Mar 14, 2016 4:46 am

I don't know where it's from.
audiobunnies.jpg

You people get good results. I'm searching for a good saphire stylus too.

fat
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41301Unread post Snug Music
Mon Mar 14, 2016 5:48 am

Fatrecco wrote:I don't know where it's from.
audiobunnies.jpg

You people get good results. I'm searching for a good saphire stylus too.

fat

Hehee... :mrgreen: :mrgreen: :mrgreen:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41354Unread post Snug Music
Tue Mar 15, 2016 3:04 pm

aaron wrote:Are you having to dip the cones multiple times in resin? I did one dip and they're still very flexible

hey,..
have u done the cone?
it´s alright?
the suspense will kill me... :mrgreen:

regards Scotty ;)
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
aaron
Posts: 203
Joined: Sun Sep 04, 2005 4:51 pm
Location: USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 41357Unread post aaron
Tue Mar 15, 2016 4:57 pm

I dipped them once, they're still very flexible. It got cold outside, and I've been doing it in the garage because the resin smells so bad... So I'm waiting for it to warm up a little. I guess I need to dip again. How many times did you dip it?
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41372Unread post Snug Music
Tue Mar 15, 2016 9:04 pm

aaron wrote:I dipped them once, they're still very flexible. It got cold outside, and I've been doing it in the garage because the resin smells so bad... So I'm waiting for it to warm up a little. I guess I need to dip again. How many times did you dip it?
:shock: :roll:

Dipped 1X in 2k Epoxy Resin...and wait, 3 hours..thats it!

Do you have the harder with pure mixed ?? otherwise can not do that !. 2K, epoxy resin !!!! 8) :wink: :!: :!:

best regards
8) Scotty
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
aaron
Posts: 203
Joined: Sun Sep 04, 2005 4:51 pm
Location: USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 41396Unread post aaron
Wed Mar 16, 2016 4:50 pm

I actually used polyester resin, which is what you recommended earlier in the thread.
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41462Unread post sakuszi
Sun Mar 20, 2016 7:07 am

Snug Music , look , test head speacker 200W test burning coil drive 5 sec 1A ,minute 1:20 , smoke from the coil :mrgreen: https://www.youtube.com/watch?v=e_6Cesg6oTM&feature=youtu.be
Top
User avatar
cosmO_O
Posts: 47
Joined: Mon May 05, 2014 6:37 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41521Unread post cosmO_O
Tue Mar 22, 2016 5:06 pm

Can somebody make a new upload about the first 30 high res pic, please! Thank you guys!!! :!:
marct wrote:I think i'm the first person with this little surprise, but here are 30 pictures from the VR cutterhead while it's open 8)

A few days ago i open the cutterhead from the Vinylrecorder, and after that i made 30 pictures.

This link from Wetransfer, is working until 30 december 2015, and please let me know what you think of the tweeters :)

Marc

Link to Wetransfer: https://www.wetransfer.com/downloads/4bb30f65c848a4c65c7e5ae6acf2fa2320151223204543/8e8688a35ba4329622c7c0aa7d724ba920151223204543/6930e4
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41545Unread post Snug Music
Thu Mar 24, 2016 6:09 am

cosmO_O wrote:Can somebody make a new upload about the first 30 high res pic, please! Thank you guys!!! :!:
marct wrote:I think i'm the first person with this little surprise, but here are 30 pictures from the VR cutterhead while it's open 8)

A few days ago i open the cutterhead from the Vinylrecorder, and after that i made 30 pictures.

This link from Wetransfer, is working until 30 december 2015, and please let me know what you think of the tweeters :)

Marc

Link to Wetransfer: https://www.wetransfer.com/downloads/4bb30f65c848a4c65c7e5ae6acf2fa2320151223204543/8e8688a35ba4329622c7c0aa7d724ba920151223204543/6930e4
here is it! 8) :wink:

http://we.tl/d16fceADe3
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
Thelurker
Posts: 88
Joined: Mon Dec 08, 2014 1:15 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41581Unread post Thelurker
Fri Mar 25, 2016 8:16 pm

Hey Scott

Have you tried the Diamond Audio yet?
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41625Unread post sakuszi
Sun Mar 27, 2016 8:10 pm

Thelurker wrote:Hey Scott

Have you tried the Diamond Audio yet?
http://www.lathetrolls.com/viewtopic.php?f=1&t=2715
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41657Unread post Snug Music
Tue Mar 29, 2016 2:06 am

d6 diamond audio

NO!!! :wink:

Before i change the d6 tweeters to the head, i will make a other test with "SINUSLINE CAR TWEETERS", they have a metal-housing for better Resonanz.
I found it last days by my electronic-dialer.
They have a pretty good frequency response!!!

Updates follow this day.....stay tuned! ;)

Scotty 8)
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41659Unread post sakuszi
Tue Mar 29, 2016 8:37 am

well
I am currently working now on the head of a super , very very fast, the frequency response of 15Hz to 25kHz , metal head, similar to JVC, fire and smoke! I have a friend who has a precision CNC machine, my friend also watches, repairs, he told me this week will do me the head of my project, no problem. It will be riding so I think :) 8) https://www.youtube.com/watch?v=VeIaBFqH4yE&feature=youtu.be
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41663Unread post Snug Music
Tue Mar 29, 2016 5:25 pm

Here a little update

Driver (Tweeter) = Sinuslive NEO25s

i have make a new centerholder and change the head
new cones new headhousing and other parts.

cone is papercone 26mm x 20mm-High,.. glued and overglued completly with superglue and than i dipped in 2k epoxy-resin.
Rods are 1,2mm Brass
Centerholder works absolutly perfect!!!
20160329_193223.jpg
20160329_193418.jpg
20160329_164209.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by Snug Music on Tue Mar 29, 2016 5:35 pm, edited 1 time in total.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41664Unread post Snug Music
Tue Mar 29, 2016 5:29 pm

20160329_193439.jpg
20160329_164125.jpg
20160329_164146.jpg
thats for tonight..

stay tuned...

regards Scotty :wink:
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41665Unread post Snug Music
Tue Mar 29, 2016 6:09 pm

our selfmade custom blanks

8) :wink:

:twisted: :twisted: :twisted:
20160330_000159.jpg
20160330_000414.jpg
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
Post Reply

Click Here!