JE-1D Version 356
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Re: JE-1D Version 356
I know this is an old thread, but did you find the Dayton Dats useful and if so in what way?
Happy to learn something new.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Re: JE-1D Version 356
Hi Simon,
I’m a big fan of the DATs tester. It’s been great to ensure all the coils are wound to the same impedance. It’s also useful to make sure that all the spring tensions are consistent, and does a good job highlighting if the pressure between the three springs are equal.
There is an inbuilt comparison mode too, which can overlay a known good head over whatever head you are testing.
I need to post an updated on these cutting heads. But life is getting away on me
I’m a big fan of the DATs tester. It’s been great to ensure all the coils are wound to the same impedance. It’s also useful to make sure that all the spring tensions are consistent, and does a good job highlighting if the pressure between the three springs are equal.
There is an inbuilt comparison mode too, which can overlay a known good head over whatever head you are testing.
I need to post an updated on these cutting heads. But life is getting away on me
Record Lathe Embossing Supplies + Embossed Records - http://www.johnnyelectric.co.nz/