what size nichrome wire?..
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
what size nichrome wire?..
I have a diamond stylus that has no heating wire, I tired to salvage one off an old sapphire, but wire broke while unraveling it. Does anyone know what size wire i should by to put on this stylus.
just serached, looks like 36g or .005" will work, and so does 40g
just serached, looks like 36g or .005" will work, and so does 40g
It was suggested to me to use Dental Cement to hold the NiChrome wire in place on the stylus. Thought I would share that tid-bit of info.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
nichrome wire
you mention cement for temporary fillings,
I have tried this stuff and it was garbage - totally useless
now the cement used by a dentist may be ok, for sale on ebay
but never tried it yet.
I buy nichrome used for cutting polystyrene it works fine but don't know
the gauge.
emidisc
I have tried this stuff and it was garbage - totally useless
now the cement used by a dentist may be ok, for sale on ebay
but never tried it yet.
I buy nichrome used for cutting polystyrene it works fine but don't know
the gauge.
emidisc
The package I have says Glass Ionomer Cement. It is a poweder liquid system.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio