Stamper thickness

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
Self-lather
Posts: 240
Joined: Wed Jun 27, 2007 9:14 am
Location: Atlanta, Ga
Contact:
Contact Self-lather

Stamper thickness

Post: # 29179Unread post Self-lather
Wed Mar 05, 2014 10:29 am

Is there a standard thickness for stampers? I measured one and it was .01".

Thanks

-Thomas
Top

Click Here!

User avatar
DISCOPRESS
Posts: 15
Joined: Fri May 30, 2014 8:08 pm
Location: Germany

Re: Stamper thickness

Post: # 30298Unread post DISCOPRESS
Sat May 31, 2014 4:35 pm

Its well around 0,2/0,25mm
Top
User avatar
Greg Reierson
Posts: 198
Joined: Thu Jul 29, 2010 1:31 pm
Location: Minneapolis, MN
Contact:
Contact Greg Reierson

Re: Stamper thickness

Post: # 30299Unread post Greg Reierson
Sat May 31, 2014 4:44 pm

What happens to stampers as they age? How do they wear out?
Greg Reierson
http://www.RareFormMastering.com
VMS70 :: SAL74B :: SX74
Top
User avatar
DISCOPRESS
Posts: 15
Joined: Fri May 30, 2014 8:08 pm
Location: Germany

Re: Stamper thickness

Post: # 30301Unread post DISCOPRESS
Sat May 31, 2014 6:31 pm

Well stampers are made from pure Nickel Who also is a "flexible" Metal... Maybe After 1000 press cycles the Grooves are deformed then... The compound goes from the Label Area to the outside of the stamper. This movement Works also like a grind... Grove dept isnt given then on the pressed record... Backround Noise is the result.
Top
Post Reply

Click Here!