Hey Guys!
I just purchased a Gates CB-77 that I just got working now but from improper stoarge the idler wheel got bent and is dried out.
http://www.turntablebasics.com/idlerwheels.html
Turntable Basics can rebuild any wheel but a 4 week turnaround time is way too long for me.
Does anyone here have a spare or can rebuild one if I send it to them?
Thanks!
Idler Wheel for Gates CB-77
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Re: Idler Wheel for Gates CB-77
Thanks Mark!
I emailed him since it's Solid rubber wheel with a brass bushing.
A week turnaround is much better!
This turntable will be used for my home brew lathe.
Actually i got the idea to use a rim driven turntable from seeing your build. So thanks again!
I emailed him since it's Solid rubber wheel with a brass bushing.
A week turnaround is much better!
This turntable will be used for my home brew lathe.
Actually i got the idea to use a rim driven turntable from seeing your build. So thanks again!
Re: Idler Wheel for Gates CB-77
Cool, looks like Terry will be receiving a rubber idler from me.
Thanks again Mark!
Thanks again Mark!