
Show yourselves.
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- dietrich10
- Posts: 845
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact:
Is that Clark Kent? No. It's just Serif...
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio

i might also be the youngest, also in this photo i look like a muppet.
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
- petermontg
- Posts: 611
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
I do use the S in my premastering studio logo.opcode66 wrote:Is that Clark Kent? No. It's just Serif...

Only mine is there twice - forwards and backwards - so as to null the sibilance? Recently, I moved the letters, S, apart by several mil so that they wouldn't look like an overcut. Was not trying to symbolize grooves, at the time of its creation, but now, in light of the likelihood of there being more and more "cutting remarks," I decided that it should look the part, in every wise.
Also, for what it's worth, I find my American Optical old-timer specs way less metro-sexual than these Clark Kent characters wear:
http://www.imdb.com/media/rm3089348608/ch0118677
http://www.imdb.com/media/rm3526465536/ch0000196
Mine are much closer in style to the one that George Reeves wore, back in 1952 or so - the tail end of the fixed pitch-only era:

Just read that Clark was meant to have chosen his specs based on those worn by Gregory Peck in "To Kill A Mockingbird."

There was a movie in the Seventies called, "Can I Do It 'Til I Need Glasses," but I think it was only about ogling. (Maybe mastering?) (';
Cheers,
Henry Faraday
- petermontg
- Posts: 611
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
Sean, I think you might like this. http://terriermandotcom.blogspot.com/2012/02/badger-thermin.htmlJesus H Chrysler wrote:real name : Sean McMillan
aliases: Jesus H Chrysler, Ultrasonic Man, Rah Rah Records (not the rap label of the same name...I was using it first)
I look like this
- Jesus H Chrysler
- Posts: 190
- Joined: Sun Nov 26, 2006 12:03 am
- Location: Asheville, NC
- petermontg
- Posts: 611
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
- The Treaty Oak Collective
- Posts: 5
- Joined: Fri Jan 20, 2012 11:51 am
- Location: Houston Tx
- Contact:
Ok Guys after a lot of reluctance here it is Ha Ha and no need piaptk to chime in Ha Ha again
Natinal newspaper, went all over the country, there a few other photos as well there if any one cares
http://www.theage.com.au/national/just-for-the-record-its-dirty-work-but-someone-has-to-do-it-20120606-1zwny.html
Cheers
Natinal newspaper, went all over the country, there a few other photos as well there if any one cares

http://www.theage.com.au/national/just-for-the-record-its-dirty-work-but-someone-has-to-do-it-20120606-1zwny.html
Cheers
"The Vinyl Truth"
Chris
Chris
- petermontg
- Posts: 611
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
155 Lb's at 5'3" and a half Please
To much running around to put any fat on cutting plating pressing WTF
I stick a finger Up when I go past the local gyms seeing all these fatties sweating it off
No time to indulge on never ending plates of food but a nice cold beer or two makes up real good
Cheers
To much running around to put any fat on cutting plating pressing WTF
I stick a finger Up when I go past the local gyms seeing all these fatties sweating it off

No time to indulge on never ending plates of food but a nice cold beer or two makes up real good
Cheers
"The Vinyl Truth"
Chris
Chris
- dietrich10
- Posts: 845
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact:
-
- Posts: 1852
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact: