Pkrd bell fone.o.chord. Need basic schematic. Turn over cutting head
Need parts like caps. Need correct reading resisters.. any help.. last step besides re setting arm to correct arm posture.
crystal cutter amp
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- Angus McCarthy
- Posts: 760
- Joined: Mon Aug 23, 2010 6:22 pm
- Location: Bloomsburg, PA, USA
There's sometimes a schematic inside of the case. Failing that, you can try going through the amp and trace the circuits. You shouldn't have to replace resistors. The only thing that tends to disintegrate are the old electrolytic caps. Leave the mica caps since they won't dry out. The best places to find caps for older amps would be from someone who sells supplies for antique radio repair.