New member from France.
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
New member from France.
Hello to all.
As a member of this forum for a short time, so I allow myself to introduce myself.
In advance, I apologize for my bad english, for this reason I use a trducteur ....
I'm David and I live in France, in the region of Franche-Comté.
I started a short time ago, my business manufacturing stampers for vinyl.
Since I do not have huge financial means, I started with a very small studio and materials in small numbers but in good working condition.
My galvanic workshop at the moment, I am equipped with tanks containing two works, each with a power supply that can go up to 100A bath.
This bath allows me to do both formats, 14 "and 10".
I know it is not much and I hope to soon equip me another bath.
Here are some pictures of my bath :
As other materials, I have a cabin for silver I refreshed with original color ...
For the preparation of lacquers, I use an old bath or lacquers are in rotation:
And also a small system with agitation tanks for the various stages of preparation lacqers :
For the part of the rinsing lacqers I realized a small space rinsing with a small surface containing a suction Work :
For the manufacture of pure water I have a small unit manufacturing pure water with a reserve of 250L with manufacturing pure water directly .
This manufacturing unit is convenient and allows me to have pure water for about 10-155 days and régération is made less than an hour :
For customers who wish, I also have a small studio cutting allows me to make myself the cutt , although it is not my main activity :
Small video of a cutt session...
https://www.youtube.com/watch?v=0QUWikckBnM
I hope you enjoyed the presentation of my small and humble workshop and of course, I am at your disposal for any questions about it.
I wish you all good luck in your activitées or your passions and soon on this forum.
David.
As a member of this forum for a short time, so I allow myself to introduce myself.
In advance, I apologize for my bad english, for this reason I use a trducteur ....
I'm David and I live in France, in the region of Franche-Comté.
I started a short time ago, my business manufacturing stampers for vinyl.
Since I do not have huge financial means, I started with a very small studio and materials in small numbers but in good working condition.
My galvanic workshop at the moment, I am equipped with tanks containing two works, each with a power supply that can go up to 100A bath.
This bath allows me to do both formats, 14 "and 10".
I know it is not much and I hope to soon equip me another bath.
Here are some pictures of my bath :
As other materials, I have a cabin for silver I refreshed with original color ...
For the preparation of lacquers, I use an old bath or lacquers are in rotation:
And also a small system with agitation tanks for the various stages of preparation lacqers :
For the part of the rinsing lacqers I realized a small space rinsing with a small surface containing a suction Work :
For the manufacture of pure water I have a small unit manufacturing pure water with a reserve of 250L with manufacturing pure water directly .
This manufacturing unit is convenient and allows me to have pure water for about 10-155 days and régération is made less than an hour :
For customers who wish, I also have a small studio cutting allows me to make myself the cutt , although it is not my main activity :
Small video of a cutt session...
https://www.youtube.com/watch?v=0QUWikckBnM
I hope you enjoyed the presentation of my small and humble workshop and of course, I am at your disposal for any questions about it.
I wish you all good luck in your activitées or your passions and soon on this forum.
David.
Re: New member from France.
Fantastic! Love to see some stampers.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: New member from France.
Tanks you opcode66 !
Cordialy.
David
Cordialy.
David
Best regards.
David
Cutting & Galvanoforming
https://www.facebook.com/galvanoforming
https://www.youtube.com/channel/UCYoOS53WYfPDZnIIFdRFpaw
David
Cutting & Galvanoforming
https://www.facebook.com/galvanoforming
https://www.youtube.com/channel/UCYoOS53WYfPDZnIIFdRFpaw
- dietrich10
- Posts: 842
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact:
Re: New member from France.
Looks great David.
Maybe you need a change of scenery and a move to the US state of Connecticut? Set this up next door to me...
Maybe you need a change of scenery and a move to the US state of Connecticut? Set this up next door to me...
cutting lacquers-vms70 system
Re: New member from France.
Yes, it would be a nice trip!
You are a manufacturer of vinyl record?
You are a manufacturer of vinyl record?
Best regards.
David
Cutting & Galvanoforming
https://www.facebook.com/galvanoforming
https://www.youtube.com/channel/UCYoOS53WYfPDZnIIFdRFpaw
David
Cutting & Galvanoforming
https://www.facebook.com/galvanoforming
https://www.youtube.com/channel/UCYoOS53WYfPDZnIIFdRFpaw
- dietrich10
- Posts: 842
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact:
Re: New member from France.
NO not pressing, just cutting and mastering. Two semi-automatic 12" presses would be a nice addition too. If i could find a local steam confident person to run that setup
cutting lacquers-vms70 system
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: New member from France.
Congratulations. You have done a top job. It looks like your plating tanks were made for videodisc stampers, hence being able to plate 14" lacquers with such a modern system. All the best with your venture!!
Re: New member from France.
Thank you all for your message.
Best regards.
David
Cutting & Galvanoforming
https://www.facebook.com/galvanoforming
https://www.youtube.com/channel/UCYoOS53WYfPDZnIIFdRFpaw
David
Cutting & Galvanoforming
https://www.facebook.com/galvanoforming
https://www.youtube.com/channel/UCYoOS53WYfPDZnIIFdRFpaw
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
Re: New member from France.
Congrats. Looks awesome. Hopefully it is fruitful for you.
Best
Best
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
Re: New member from France.
Hello Péter.
Thank you for your message and your encouragement !
Thank you for your message and your encouragement !
Best regards.
David
Cutting & Galvanoforming
https://www.facebook.com/galvanoforming
https://www.youtube.com/channel/UCYoOS53WYfPDZnIIFdRFpaw
David
Cutting & Galvanoforming
https://www.facebook.com/galvanoforming
https://www.youtube.com/channel/UCYoOS53WYfPDZnIIFdRFpaw