NOISE

Introduce yourself! Recommended for people who are just starting out, as opposed to experienced lathe cutters who are new members.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
msartori
Posts: 43
Joined: Thu Oct 01, 2020 5:25 pm

NOISE

Post: # 61093Unread post msartori
Fri Jul 08, 2022 6:06 pm

Can you help me to understand this type of noise?
Stylus new.( sharpened)
VR
beginning of a 10 inc ( https://mega.nz/file/iw4BSD7K#3JyRgGEEVnFEDRJS2-FEASBuY61kydNB02FluMHmHrE )
end of a 10 inc (https://mega.nz/file/X9ZAUaIQ#uXH7aKXY3wG6vI_sWBOwD-0Qszr9V6DHjVCm4BKznr8)

In the file you can hear the loudest noise at the beginning of the disc. (Beginning.mp3)
At the end of the record the noise is acceptable. (End.mp3)
I tried heating the stylus to 0.60 and heating the record to 35 degrees.
Room humidity 50%.
if the stylus needs to be sharpened, the noise is different and the sound is not good…
In this case, The sound is good but every now and then this noise comes back.
This noise drives me crazy.

User avatar
msartori
Posts: 43
Joined: Thu Oct 01, 2020 5:25 pm

Re: NOISE

Post: # 61152Unread post msartori
Sat Jul 16, 2022 6:25 pm

stupid question?

User avatar
Sylvere
Posts: 66
Joined: Tue Dec 15, 2020 2:02 pm
Contact:

Re: NOISE

Post: # 61154Unread post Sylvere
Sun Jul 17, 2022 5:25 am

hi,
0.60 on the Souri main unit ? cause graduation is 10 by 10 on the Unit !
Souri tell to heat the black at 40 45°!

Post Reply