- buddybolden
- Posts: 12
- Joined: Tue Feb 21, 2017 4:17 pm
- Location: Poland
- Contact:
Hi everybody, Jed Here from Poland, Presto K-10
Hi everyone,
my Presto K-10 cuttter finally arrived.
I'm attaching couple of pictures, will be uptading infos about the restoration process,
yours,
Jed
my Presto K-10 cuttter finally arrived.
I'm attaching couple of pictures, will be uptading infos about the restoration process,
yours,
Jed
You do not have the required permissions to view the files attached to this post.
Re: Hi everybody, Jed Here from Poland, Presto K-10
Does it have all four worm gears? They should be located under the platter.
- Voxster1965
- Posts: 81
- Joined: Tue Apr 21, 2015 11:38 pm
Re: Hi everybody, Jed Here from Poland, Presto K-10
And does it have inside - out and outside - in feed screws ?
Re: Hi everybody, Jed Here from Poland, Presto K-10
Does it have the 45 adapter?
<\\\\\\\\\\\\\\\\\\\\\[[[[[[[\/]]]]]]]\\\\\\\\\\\\\\\\\>
Recordette Sr.......Presto K-8
Recordette Sr.......Presto K-8
- buddybolden
- Posts: 12
- Joined: Tue Feb 21, 2017 4:17 pm
- Location: Poland
- Contact:
Re: Hi everybody, Jed Here from Poland, Presto K-10
Hi,
sorry my friends, I missed your posts as I haven't had an email reminder.
It has 3 of the four colored feeders, allready mechanically working, but cutting on external amp temporarily. Actually all complete not to mention the one feeders missing (neutral OI standard groove worm missing).
- The 50hz europe current capstans are going to be custom made next week
- same with motor rewinding within 2 weeks (makes the coil magnet buzzes audible after recording)
- local plexi -PVC factory is going to provide me various materials for recordings tests
- the amp is in service allready, although 100 complete.
Allready purchased another, one Presto K-8 machine will be here with vme within 2 months I believe
Just curious why you all independently are asking about the feeders, are they so desirable and rare? Am I luvy guy having three of four ?
sorry my friends, I missed your posts as I haven't had an email reminder.
It has 3 of the four colored feeders, allready mechanically working, but cutting on external amp temporarily. Actually all complete not to mention the one feeders missing (neutral OI standard groove worm missing).
- The 50hz europe current capstans are going to be custom made next week
- same with motor rewinding within 2 weeks (makes the coil magnet buzzes audible after recording)
- local plexi -PVC factory is going to provide me various materials for recordings tests
- the amp is in service allready, although 100 complete.
Allready purchased another, one Presto K-8 machine will be here with vme within 2 months I believe
Just curious why you all independently are asking about the feeders, are they so desirable and rare? Am I luvy guy having three of four ?
Re: Hi everybody, Jed Here from Poland, Presto K-10
I asked to be informative, many folks buying suitcase machines don't know the difference between the K8 and K10 so they don't know they are there. The K10 in general are harder to find, the worm gears were made out of a rather brittle material so finding a machine with all 4 gears in good condition is tough. They were shipped with 1 gear on the platter and the other three mounted to the base.
Re: Hi everybody, Jed Here from Poland, Presto K-10
Yeah, the fourth is probably mounted on the platter shaft.
Those make the k10 a more versatile unit.
Those make the k10 a more versatile unit.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
- buddybolden
- Posts: 12
- Joined: Tue Feb 21, 2017 4:17 pm
- Location: Poland
- Contact:
Re: Hi everybody, Jed Here from Poland, Presto K-10
Hi, thank you
Yes, it has 3 of four gears, all gears VG condition with not play or dents
the 4-th one is missing, but I think in those modern times a good autocad programmist and a cool 3D printer should cope with this issue , if any of us in need of a new feeder.
PS: I've just purchased a Presto K-8 too, will be with me here in Poland within 2 months
Yes, it has 3 of four gears, all gears VG condition with not play or dents
the 4-th one is missing, but I think in those modern times a good autocad programmist and a cool 3D printer should cope with this issue , if any of us in need of a new feeder.
PS: I've just purchased a Presto K-8 too, will be with me here in Poland within 2 months
- buddybolden
- Posts: 12
- Joined: Tue Feb 21, 2017 4:17 pm
- Location: Poland
- Contact:
Re: Hi everybody, Jed Here from Poland, Presto K-10
PS:
any of you able to track the K-10 production year with only a serial number?
any of you able to track the K-10 production year with only a serial number?