Calling VR users - Help using this tool?
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- cosmicslop
- Posts: 4
- Joined: Sat Jul 21, 2018 6:39 pm
Calling VR users - Help using this tool?
Hello all,
I have a VR, and I can't for the life of me remember the utilisation of this tool, see photo attached:
How exactly is it used in the calibration process? I vaguely recall from Souri's training day but my notes are blank on this except for a shitty drawing of the tool itself.
Cheers,
Henry
I have a VR, and I can't for the life of me remember the utilisation of this tool, see photo attached:
How exactly is it used in the calibration process? I vaguely recall from Souri's training day but my notes are blank on this except for a shitty drawing of the tool itself.
Cheers,
Henry
You do not have the required permissions to view the files attached to this post.
Re: Calling VR users - Help using this tool?
It's to sit the cutting head on (upside down), so you can change the stylus more easily.
- cosmicslop
- Posts: 4
- Joined: Sat Jul 21, 2018 6:39 pm
Re: Calling VR users - Help using this tool?
SueDenim wrote:It's to sit the cutting head on (upside down), so you can change the stylus more easily.
Thank you for your response. That is helpful. It has no role in calibrating the cutterhead angle then?
- audiosteam
- Posts: 104
- Joined: Fri Sep 16, 2016 6:18 pm
- Location: Brno, CZ
Re: Calling VR users - Help using this tool?
No. it's for holding the head upside down under the microscope. For cutting head angle calibration use something rigid that you cut to the desired angle. Myshank sells some if you're not making your own.
- cosmicslop
- Posts: 4
- Joined: Sat Jul 21, 2018 6:39 pm
Re: Calling VR users - Help using this tool?
does Souri give this to VR?
- audiosteam
- Posts: 104
- Joined: Fri Sep 16, 2016 6:18 pm
- Location: Brno, CZ
Re: Calling VR users - Help using this tool?
Yes it's part of the bundle. A must have for the head as the tool for changing the stylus.
Re: Calling VR users - Help using this tool?
would anyone know exactly what the Souri's VR starter set contains?
Besides that :
Complete Mechanic
Stereo Cutter Head
Diamond Stylus
Lamp 220V 40W
19" Main Unit
Inclusive Regulated Power Supply
are there any little things? for example : record clamp, screwdriver, mono microscope or this the calibration tool ?
Besides that :
Complete Mechanic
Stereo Cutter Head
Diamond Stylus
Lamp 220V 40W
19" Main Unit
Inclusive Regulated Power Supply
are there any little things? for example : record clamp, screwdriver, mono microscope or this the calibration tool ?