Newb questions about groove :)

Introduce yourself! Recommended for people who are just starting out, as opposed to experienced lathe cutters who are new members.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
Sylvere
Posts: 66
Joined: Tue Dec 15, 2020 2:02 pm
Contact:

Newb questions about groove :)

Post: # 57536Unread post Sylvere
Thu Jan 14, 2021 4:38 am

Hello tooti,
Healthy new year !
My question:
Can I cut groove in mono mode (not Micro groove) with a Souri T560 ?
For a mono signal no problem, but for a groove ?
Do I need replace the stylus ?
Is it possible to achieve that and how ?
Thx for reply.
Take care.
syl

User avatar
Sylvere
Posts: 66
Joined: Tue Dec 15, 2020 2:02 pm
Contact:

Re: Newb questions about groove :)

Post: # 57553Unread post Sylvere
Tue Jan 19, 2021 5:13 am

I mean:
if I cut deep groove in mono at 78rpm with a T560,
could I play correctly at 78 rpm the cutting result on a gramophone ?

User avatar
Jesus H Chrysler
Posts: 190
Joined: Sun Nov 26, 2006 12:03 am
Location: Asheville, NC

Re: Newb questions about groove :)

Post: # 58006Unread post Jesus H Chrysler
Fri Mar 12, 2021 10:42 pm

The profile of the cutting stylus is narrower, and a steel gramophone needle at the headweight they play at will wear out a record super fast. But if you play it back with a super sharp cactus needle it can work.

Post Reply