Record sleeves and bags
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Record sleeves and bags
Can any of you tell me a good place to pick up odd sized record sleeves and bags?
Specifically, I need some for a 5" record.
Specifically, I need some for a 5" record.
http://www.uline.com/BL_107/Uline-2-Mil-Industrial-Poly-Bags
You should ask them for samples. a 5" record might not fit a 5"x5" bag, if the 5" is the actual outer dimension.
You should ask them for samples. a 5" record might not fit a 5"x5" bag, if the 5" is the actual outer dimension.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
-
- Posts: 1852
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Is Bags Unlimited in the USA still around? They were the major source for inner bags, poly sleeves, etc.
As for your 5" record surely the plant that pressed them has some? Enevelope manufacturers can custom-make these for you. Otherwise you can print a 5" x10" sheet, fold it and slip it into a 5" plastic sleeve that you would have to have custom made. I always found plastic sleeves were cheaper to make than paper sleeves as the paper sleeve manufacturers wanted a minimum order of 100,000 pieces to be cost effective. The plastic bag makers would make 1,000 units quite happily.
As for your 5" record surely the plant that pressed them has some? Enevelope manufacturers can custom-make these for you. Otherwise you can print a 5" x10" sheet, fold it and slip it into a 5" plastic sleeve that you would have to have custom made. I always found plastic sleeves were cheaper to make than paper sleeves as the paper sleeve manufacturers wanted a minimum order of 100,000 pieces to be cost effective. The plastic bag makers would make 1,000 units quite happily.