Diamond cutting Stylus for Presto 6N

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
MonsieurMatt
Posts: 8
Joined: Fri Nov 30, 2012 10:41 pm
Location: Memphis TN

Diamond cutting Stylus for Presto 6N

Post: # 25579Unread post MonsieurMatt
Thu May 23, 2013 2:21 pm

Hello Trolls!
I need to find a diamond cutting Stylus for my Presto 6n Lathe, I know of
http://www.diamond-cutting-stylus.com/stylus-shop/
but they are in Europe and are imported and I just wondered if there was a place in the USA that has them?
Any help would be appreciated!
Cheers,
Matt
mrs@sunstudio.com
Top

Click Here!

User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:
Contact opcode66

Re: Diamond cutting Stylus for Presto 6N

Post: # 25581Unread post opcode66
Thu May 23, 2013 5:17 pm

I make 320 style shank Neumann diamonds. You can have a metal shop make you a shank extension. It would go in the cutterhead and would hold the Neumann style diamond in the other end. I have not had the ability to have other shanks fabricated right now. I have too much going on...

I'm in the USA. My diamonds are 100% manufactured in the USA. We DO NOT import from oversees. Laser cut and then conventionally polished.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Top
Post Reply

Click Here!