Help Again with my Neumann Lathe

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
Jolyman
Posts: 23
Joined: Fri Sep 05, 2014 3:29 pm

Help Again with my Neumann Lathe

Post: # 39330Unread post Jolyman
Mon Dec 28, 2015 11:59 am

Hello my friends,
you have been so gentle with my quest for a perfect lathe.
So I have another question, If you please can help a Brazilian cutter.
I've been searching for the oils for mu Neumann lathe.
I did not find the ones in the manual I have. Not on ebay, not here in Brasil.
Can somebody help me with this information ?
I do not know where to find them.

Thank you very much again.

Arthur
Top

Click Here!

User avatar
Cutterwoller
Posts: 103
Joined: Wed May 03, 2006 3:32 pm
Location: London

Re: Help Again with my Neumann Lathe

Post: # 39445Unread post Cutterwoller
Tue Jan 05, 2016 1:55 am

What parts of the lathe need oiling?

Don't use any oils that contain waxes or detergents. They will usually not say on the bottle if they do or not. Don't use an oil if unsure what is in it.

For the turntable bearing; detergent free, non synthetic engine oil like used in the turntables can be used. 5W30 should do it.

Lewis
Top
User avatar
Jolyman
Posts: 23
Joined: Fri Sep 05, 2014 3:29 pm

Re: Help Again with my Neumann Lathe

Post: # 39528Unread post Jolyman
Fri Jan 08, 2016 5:44 am

Thank you very much Lewis !
this helped me a lot !!!!

thank you
Top
Post Reply

Click Here!