Hey folks, getting close to finishing a 66 restore and missing a couple key pieces I'd rather not try to fabricate / replace with something else.
Short black vacuum hose with metal fitting that approaches vacuum platter
Chicken head knob for heater on lathe panel (next to mA meters)
Marquardt 15A rectangular black power switch for pitch computer (in left side of pedestal)
And now the super long shot stuff...
If anyone has an aluminum vacuum platter or suspension box housing parts (we're missing a couple walls on a suspension box, we could fab but it's a pain).. these parts are needed for an AM32b restoration that will happen later in the year. Also black skirted marked LPI knob that looks like a daven type (but isn't).
Thanks for your consideration!
BTW if anyone needs exact paint matches, I had a powdercoat company in CA work up hammertone poly paint matches for the both the Neumann champagne hammertone and the dark grey for the sleds & overhead arms. They're very close, certainly within the tolerances of varying tones that Neumann came up with back then. Hammertone sort of changes tone depending on humidity and how it's sprayed, etc.
Dave Cooley / Elysian Masters
VMS66 parts wanted
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- yeloocevad
- Posts: 33
- Joined: Wed Dec 17, 2014 2:29 pm
Re: VMS66 parts wanted
Hose, knob, and power switch now sourced...
Down to the super long shots
Down to the super long shots