New Dynamic Stereo Head for Sale

[kostix]

really glad to hear this, really promising work and results out there in the world with these heads, congrats

Thank you my friend!

[MEGAMIKE]

would love to get one or 2 for my prestos but where will I get the diamonds from? skank won't sell me them will you supply them?

[ABON]

a few words for anyone thinking about this head

so head is mounted to my sondisko lathe and i did some test cuts ..

its phenomenal !!! the sound compared to my sondisko is obviously a HUGE increase... there was still some surface noise, but after talking to mike @piaptk and adjusting the back angle, it got a lot better.. still there though...

i purchased 250ma fuses and WOW the head is loud!!! .. havnt even popped a fuse yet! im scared to increase the level

i purchased a power supply and ran the heating at 0.3A and there's now so LITTLE noise i can cut an acoustic track and have nearly NO surface noise.. the highs are CRISP ... almost too crisp on some frequencies (i might have to eq some down a little) but MAN the bass is punchy !!!!!

i really want to thank you for everything mate !!! this head has really taken my little lathe cutting business to a whole new level!!!!

[boryo]

a few words for anyone thinking about this head

so head is mounted to my sondisko lathe and i did some test cuts ..

its phenomenal !!! the sound compared to my sondisko is obviously a HUGE increase... there was still some surface noise, but after talking to mike @piaptk and adjusting the back angle, it got a lot better.. still there though...

i purchased 250ma fuses and WOW the head is loud!!! .. havnt even popped a fuse yet! im scared to increase the level

i purchased a power supply and ran the heating at 0.3A and there's now so LITTLE noise i can cut an acoustic track and have nearly NO surface noise.. the highs are CRISP ... almost too crisp on some frequencies (i might have to eq some down a little) but MAN the bass is punchy !!!!!

i really want to thank you for everything mate !!! this head has really taken my little lathe cutting business to a whole new level!!!!

Great! Any chance to upload a rip? Im curious of what other people consider 'a little background noise'. Thanks!

Best,
Bob

[soeffingodly]

I don't have Konstantin's head, but all tests and samples I've heard are fantastic! (All feedback from owners has been stellar as well!)

[piaptk]

Great! Any chance to upload a rip? Im curious of what other people consider 'a little background noise'. Thanks!

Best,
Bob

The background noise he is getting is a cut problem with his diamond setup, NOT an artifact from the cutting head. The TKV cutting head doesn't introduce any extra noise.

[ABON]

yes correct!!

i was rolling a whole bunch of my findings into one...

Great! Any chance to upload a rip? Im curious of what other people consider 'a little background noise'. Thanks!

Best,
Bob

The background noise he is getting is a cut problem with his diamond setup, NOT an artifact from the cutting head. The TKV cutting head doesn't introduce any extra noise.

[socialroots]

Great innovative work,just wondering if this cutterhead would fit on my rek o out challenger?
Felicidades n maximum respect!
Patrick.

[Jccc]

Does anyone know where we could purchase this cutting head?
Really interested in hooking one up to my 6N

Thanks

[CutR]

Does anyone know where we could purchase this cutting head?
Really interested in hooking one up to my 6N

Thanks

piaptk has them https://www.recordlatheparts.com/collections/lathe-parts/products/tkv-stereo-cutter-head

[kostix]

Great innovative work,just wondering if this cutterhead would fit on my rek o out challenger?
Felicidades n maximum respect!
Patrick.

Hello my friend! Konstantin here from TKV Instruments. The head should fit on the challenger without problems. Let me know if you want more info. You can contact me directly through www.facebook.com/kostix or www.instagram.com/kostyantokarev


Regards!

[piaptk]

I do have one for sale right now in the US. Dm me.