Full Myshank Nightingale lathe (not just head replacement, full platter etc)
It’s been used for about 5 hours total.
Instruction manual included.
Needs a new amp - you will need a QSC GX3 amplifier as this is what Steven recommends for the machine.
One very very lightly used stylus, one brand new sealed stylus.
Includes vacuum and 400+ Myshank 12” blanks.
£9,000.
Located in the south of the UK.
Sold:Nightingale Full Setup
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Re: FS:Nightingale Full Setup
Show a picture of it all.
- lathecutteruk
- Posts: 2
- Joined: Mon Jul 25, 2022 3:16 am
Re: FS:Nightingale Full Setup
Now sold.
Thanks
Thanks