Technics SP-02 dokuments scans

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
andybee
Posts: 707
Joined: Mon Aug 14, 2006 2:12 pm
Location: Germany

Technics SP-02 dokuments scans

Post: # 57488Unread post andybee
Sat Jan 09, 2021 5:33 am

I am looking for a scan of SP-02 infos, pdf whatever.
I am working on a list of possible motors for lathes, this one is missing.
I mainly need the specs, but schematics would be nice, a lot of wrong infos in the net...
thanks in advance!
Andreas

andybee
Posts: 707
Joined: Mon Aug 14, 2006 2:12 pm
Location: Germany

Re: Technics SP-02 dokuments scans

Post: # 57535Unread post andybee
Thu Jan 14, 2021 1:40 am

got it thanks! what a motor, has 28kg torque!

User avatar
I.S.D
Posts: 21
Joined: Tue Oct 27, 2015 2:39 pm

Re: Technics SP-02 dokuments scans

Post: # 62288Unread post I.S.D
Mon Feb 06, 2023 4:29 pm

Any chance you could pass these on?

User avatar
dubcutter89
Posts: 361
Joined: Thu Oct 19, 2006 6:30 am
Location: between the grooves..

Re: Technics SP-02 dokuments scans

Post: # 62302Unread post dubcutter89
Wed Feb 08, 2023 9:29 am

what a motor, has 28kg torque!
Yes, it is a dedicated motor for the purpose!
But from my findings in the field torque is not everything (imo 3 kgcm is already enough for lacquer and maybe plastic cutting, but my measurements continue...).
The challange is to make it nice, smooth and controlled (and have enough torque for the job)! 8)
I am working on a list of possible motors for lathes, this one is missing.
Also missing this motor in my motor collection (or in my lathe), but had seen some in the wild...

Lukas
Wanted: ANYTHING ORTOFON related to cutting...thx

Post Reply