Hello!
We are looking to buy a cutting system and have some study and knowledge of the subject, largely thanks to this community, but would still like to please read recommendation from some of you or even get the heads up if anyone reading wants to sell.
With our budget we can buy a PRESTO 6N or 8N .
Is it really possible to prevent the motor noise from affecting the recording results?
And the second question:
Can a stereo cutting head be adapted to a FAIRCHILD 530?
Looking for Lathe Cut
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
-
andyburnout
- Posts: 23
- Joined: Sun Apr 25, 2021 10:22 pm
- Location: Melbourne
Re: Looking for Lathe Cut
Hi recvival,
If you're in the USA piaptk would be your guy, he might be able to hook you up with a 6N and I think he stocks Jed's motor from Poland which works really well with the 6N. I have one of Jed's motors and it has improved the sound.
If you're in the USA piaptk would be your guy, he might be able to hook you up with a 6N and I think he stocks Jed's motor from Poland which works really well with the 6N. I have one of Jed's motors and it has improved the sound.
-
leemichael
- Posts: 77
- Joined: Mon Jul 13, 2020 1:43 pm
Re: Looking for Lathe Cut
Mike Dixon Piaptk for anything Presto. For a stereo head on any compact lathe like a Presto contact me for a Nautilus.
Check out Rare Tone Mastering who has 3x Nautilus heads on 3x Presto overheads!
https://www.instagram.com/raretonemastering?igsh=MW14emZibGtkNDRtaA==
Check out Rare Tone Mastering who has 3x Nautilus heads on 3x Presto overheads!
https://www.instagram.com/raretonemastering?igsh=MW14emZibGtkNDRtaA==