For sale:
Neumann 131 setup - 95% restored
Included:
Am131 lathe (needs vac arm)
SC99 cutter head with matching Caruso Preamp (head needs heating wire plate and terminals as flo sent it this way to us)
Lyrec SM8/3a motor
Lyrec half speed module
SA74 suspension box (needs to be refurbished)
Etec DBTL20 limiter
VG66 which was purchased from MasterLabs
Spare cards and power supplies
Original suspension box that took the original Grampian cutter head. SOLD
Heaps of other spares and parts
Notes
Lathe starts up cuts and does everthing manually in the current state (with record fixed to the platter) If someone needs variable pitch, then a pitch13 or similar from flo would work a treat.. Jesus Agnew would be able to refurb the suspension box if needed (well when I enquired 18months ago)
Teac VU meter NFS
Not sure what to sell for as a total but $75000 usd ono.
FS: Neumann AM131 setup
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
FS: Neumann AM131 setup
You do not have the required permissions to view the files attached to this post.
Re: FS: Neumann AM131 setup
will consider parting out
Lathe with Lyrec motor and SA74 Suspension box - $35k USD
VG66 with all spare cards etc - $10k USD
SC99 with matching Caruso Preamp assembled by Flo.. diamond and sapphire stylus - $15k USD
DBTL20 - $2.5k USD
NOS 10" and 12" acetates
various other bits and pieces
or take everything for $60k ono plus shipping
Lathe with Lyrec motor and SA74 Suspension box - $35k USD
VG66 with all spare cards etc - $10k USD
SC99 with matching Caruso Preamp assembled by Flo.. diamond and sapphire stylus - $15k USD
DBTL20 - $2.5k USD
NOS 10" and 12" acetates
various other bits and pieces
or take everything for $60k ono plus shipping
- daristiguieta1
- Posts: 10
- Joined: Sat Jul 15, 2023 5:25 pm
Re: FS: Neumann AM131 setup
How much for lathe only, no motor or suspension box?