Hi guys,
If any one here is interested in these, full description listed on eBay.
https://www.ebay.ie/itm/145606496143?mkcid=16&mkevt=1&mkrid=5282-175127-2357-0&ssspo=SMxHoVDeRmy&sssrc=4429486&ssuid=SMxHoVDeRmy&var=&widget_ver=artemis&media=COPY
The GV TUBE / VALVE Feedback amplifiers were built in 1955 for the Neumann ES 59 mono cutting head.The pair can be used for a modern stereo cutting head
The SI modules are for overload protection to the cutting head, with metering, adjustable cut off , and switching modulation to the cutter head.
These units were replaced by a VG1 amplifier system in 1958, and have been sitting unused and un powered up since that time.A true original condition 'barn find'.
The modules will need to be serviced and checked before powering up. Schematic diagrams and valves/tubes are included in the sale.
Buyer pays for shipping from Ireland post code F52 WY01 .The 4 modules are already professionally packed for shipping and ready to go.
Dimensions and weight of shipping package
W = 38 cm
D = 59 cm
H = 22 cm
Weight is 2.5 kg total.
Aidan
- Masterlabs
- Posts: 22
- Joined: Wed Apr 04, 2012 5:33 pm
- Location: Dublin , Ireland
- Contact: