Scully Lathe for Sale

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
dittrich
Posts: 2
Joined: Mon Sep 18, 2006 10:52 pm
Location: Nevada

Scully Lathe for Sale

Post: # 5673Unread post dittrich
Wed Jul 22, 2009 1:13 am

My friend and I are selling a Scully Lathe on eBay:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290327442373

We bought it in 2002, but it didn't have a cutterhead or amplifiers, so we were never able to use it.
Top

Click Here!

Aussie0zborn
Posts: 1852
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:
Contact Aussie0zborn

Post: # 5674Unread post Aussie0zborn
Wed Jul 22, 2009 1:46 am

Look slike anice lathe. Good luck with the sale!
Top
User avatar
bancho
Posts: 168
Joined: Fri Dec 21, 2007 2:09 pm
Location: South of Middle Europe

Post: # 5677Unread post bancho
Wed Jul 22, 2009 11:42 am

WOW! What a beauty! :shock:
one day I will buy something like this... even if I'll have to go to the States.

just curious... for how much did you buy this beast? just to compare it with the final pice on eBay...

anyway... good luck! :)
Top
User avatar
Simon
Posts: 632
Joined: Wed Mar 05, 2008 12:25 pm
Location: London, Brighton - England

Post: # 5678Unread post Simon
Wed Jul 22, 2009 12:31 pm

Good luck with the sale.
Happy to learn something new.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Top
User avatar
editall1
Posts: 7
Joined: Sat Jul 18, 2009 5:46 pm
Location: mexico

Post: # 5712Unread post editall1
Fri Jul 24, 2009 1:51 am

Hi all,how much money it will need to put this baby up and running,no heads,no mods etc. just wondering!!! thanks
Top
User avatar
bancho
Posts: 168
Joined: Fri Dec 21, 2007 2:09 pm
Location: South of Middle Europe

Post: # 5717Unread post bancho
Fri Jul 24, 2009 9:01 am

It depends on what you want to have... either mono or stereo
mono - shouldn't be expensive (presto or grampian or any better but old cutterhead with the right amp) - check the eBay
stereo - little more expensive but affordable if you take vinylium (check www.vinylium.ch ) and even more expensive if you take the original neumann or westrex head
Top
Aussie0zborn
Posts: 1852
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:
Contact Aussie0zborn

Post: # 5732Unread post Aussie0zborn
Sat Jul 25, 2009 2:37 am

3 days 17 hours to go and only one bidder at $1,000 ??? What's going on???
Top
User avatar
TotalSonic
Posts: 227
Joined: Tue Sep 30, 2008 7:08 pm
Contact:
Contact TotalSonic

Post: # 5821Unread post TotalSonic
Tue Jul 28, 2009 8:38 pm

It went for a very reasonable $1725. If I was on the West coast instead of the East I might have thought to jump in at that price level.

Best regards,
Steve Berson
Top
User avatar
dietrich10
Posts: 845
Joined: Wed Jan 16, 2008 2:18 pm
Location: usa
Contact:
Contact dietrich10

Post: # 5824Unread post dietrich10
Tue Jul 28, 2009 10:24 pm

$1725 was tempting price but as totalsonic said if this coast.
cutting lacquers-vms70 system
Top
User avatar
flozki
Posts: 592
Joined: Fri May 19, 2006 4:40 am
Location: switzerland
Contact:
Contact flozki

Post: # 5830Unread post flozki
Wed Jul 29, 2009 7:55 am

wow. that was cheap...
for me a little to far for pickup...and have some already... but i think
up to $3000 i would buy a scully. no question.
Top
User avatar
mossboss
Posts: 2168
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

Scully Lathe price

Post: # 5837Unread post mossboss
Wed Jul 29, 2009 8:15 pm

Yep
I would have thought about the right price
By the time you debug it put the amps on it as well as a stereo cutting head on it you will be up around the $8-10 K mark and that will be about the real value of this machine
Deroy sold his for $4,500 K running with a mono head but a couple of amps included One mono original and another stereo
The last ES head Van Dyke sold NOS went for just over $1K recently and two SX 68's in the UK about GBP 1250 each or about $2.5 K
Cheers
Top
Aussie0zborn
Posts: 1852
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:
Contact Aussie0zborn

Post: # 5839Unread post Aussie0zborn
Thu Jul 30, 2009 6:12 am

Very cheap!! There is Scully in Florida with HAECO SC1 stereo head and amps on the market for USD $15,000 !!!! In comparison, this is very cheap!!! Good luck to the buyer!
Top
User avatar
dietrich10
Posts: 845
Joined: Wed Jan 16, 2008 2:18 pm
Location: usa
Contact:
Contact dietrich10

Post: # 5845Unread post dietrich10
Thu Jul 30, 2009 7:24 am

I am surprised there was not more interest with the Atlanta Scully earlier this year with the Capps pitch and stereo head.
cutting lacquers-vms70 system
Top
Post Reply

Click Here!