SOLD : Complete Neumann VMS 70 Lathe

Post: # 11968Unread post **KEVINBIGBADBASS** Tue Jan 04, 2011 3:51 pm

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300511460055

NEUMANN VMS 70 LATHE AND CUSTOM CONSOLE / PPM METERING / VU METERING
COMES WITH SX- 74 CUTTER HEAD / SAL AMPS
LEXICON MPX 1000 PROCESSOR
TC ELECTRONIC 96K FINALIZER
RARE - ORTOFON REGULATED FILTER
RARE - ORIGINAL SHURE V15 MK3 CARTRIDGE
NAB TEST RECORD.
ALICE PRE AMP.

MASTERING LATHE FOR SALE - BASED IN LONDON - SERVICED BY S.W.DAVIES AND IS GOOD REFERENCE REGARDING LATHE .

LATHE IS CURRENTLY IN STORAGE IN RECORDING STUDIO AND HASN'T BEEN USED IN OVER 18 MONTHS - WE ARE WILLING TO NEGOTIATE A DEAL ON THE COMPLETE PACKAGE.

THIS ITEM (S) IS PICK UP ONLY.. LONDON

ONLY SERIOUS INTEREST PLEASE CONTACT - WE HAD SEVERAL TIME WASTERS WHEN THIS WAS UP FOR SALE ON EBAY PREVIOUSLY - WE REALLY HAVEN'T GOT THE TIME TO ACCOMMODATE THIS..

Item condition: Used
Ended: 13 Jan, 2011 10:23:58 GMT
Starting bid: £9,750.00 [ 0 bids ]

Post: # 11969Unread post **cymbalism** Tue Jan 04, 2011 4:29 pm

Are you referencing Simon from The Exchange?

What studio was it used in? I had our first releases cut by Simon so I was wondering if it was the same machine.

Thanks!

Post: # 11970Unread post **TotalSonic** Tue Jan 04, 2011 5:19 pm

"SW Davies" refers to Sean Davies - the most eminent expert and tech for Neumann lathes in the UK and Europe. The equivalent of someone with his knowledge in the States would be Al Grundy.

Best regards,
Steve Berson

Post: # 11973Unread post **Nickou** Tue Jan 04, 2011 5:53 pm

a worldwide equivalent is Jvo from vinylium

Post: # 11977Unread post **flozki** Wed Jan 05, 2011 4:23 am

can you please provide serial numbers
of head, rack and vms70?

thanks..
f.

Post: # 12356Unread post **misjah** Mon Jan 24, 2011 1:51 pm

SOLD! (to me

)

Post: # 12359Unread post **TotalSonic** Mon Jan 24, 2011 4:37 pm

misjah wrote:SOLD! (to me )

Congratulations! If you got it for the starting bid price listed on that link you definitely got an excellent deal!

Best regards,
Steve Berson

Post: # 12362Unread post **misjah** Mon Jan 24, 2011 5:21 pm

Little above but not much....great deal indeed. Couldnt resist

Post: # 12363Unread post **dietrich10** Mon Jan 24, 2011 5:35 pm

I wanted the custom console

Post: # 12364Unread post **rabbit_tuszyn** Mon Jan 24, 2011 5:38 pm

I agree with Steve, great deal, where you at misjah?

Post: # 12365Unread post **misjah** Mon Jan 24, 2011 5:53 pm

Holland. As far as i know there are only 3 now here.

Post: # 12375Unread post **mossboss** Tue Jan 25, 2011 1:17 am

misjah wrote:Holland. As far as i know there are only 3 now here.

I thought there was 4 there already with this one 5,
2 x DMM 2 x 70, Now this = 5
I suspect there is another as there was an offer here for some related gear due to an upgrade by someone in Holland Chris????
So another one? so possibly 6 need to check it out
Cheers

Post: # 12376Unread post **misjah** Tue Jan 25, 2011 1:58 am

i was talking about vms70's....

lex @ thevinylroom has one
soundstream in rotterdam has one
i believe record industry still has one (forgot them before)
and me..24mastering

Post: # 12397Unread post **mossboss** Thu Jan 27, 2011 4:16 pm

That is Right
4 x 70's and 2 DMM'M both atr RI So that makes 6 Lathes all up located in Holland
Cheers

Post: # 12405Unread post **misjah** Fri Jan 28, 2011 12:55 am

Plus vms80 at vinylroom then so 7

Post: # 12406Unread post **Aussie0zborn** Fri Jan 28, 2011 5:07 am

Are you driving to London to pick this lathe up?

Post: # 12408Unread post **misjah** Fri Jan 28, 2011 7:54 am

already did..picked it up yesterday (long day)

Post: # 12410Unread post **Aussie0zborn** Fri Jan 28, 2011 8:20 am

good work. enjoy!!

Post: # 12411Unread post **dietrich10** Fri Jan 28, 2011 9:02 am

Another techno guy finding more ways to not the studio.

I myself am enjoying this new 'non-gigging' lifestyle.

Post: # 12412Unread post **misjah** Fri Jan 28, 2011 9:47 am

i still gig but only when i want to