Hey Lathe Guru's
I am selling one of my Lathe setup's. Please let me know if anyone is interested. I spent quite a bit of time putting this together. Everything has been cleaned and in great function order. The Head for the RCA Cutting Attachment was refurbished by Gib at West-Tech with only a few hours of use. A Custom Wood Desk was made for it. Shelves and Door. Each Corner has a Bolt Mechanism for leveling Turntable. 2 High Precision Ortofon Levels are Built into the to top for fine tuning.
Below is the entire setup.
- Gates CB500 16" Transcription Turntable / Brand New Heavy Duty Power Plug added / RCA Cables replaced
- Gates has Playback Tonearm w/ New Audio-Technica Cart/Stylus
- RCA Type 72-D Recording Attachment. Cuts 33/3 or 78 IN/OUT. The Cutting Head was Completely Refurbished by Gib at WEST-TECH
- Custom built Wood Desk with Doors for Material Storage and built in Level adjustments
Comes with a Mix of 5 Cutting and Embossing Styli/Shanks.
Copy of the RCA Type 72-D Manual
(2) 12" Blank Optix Disks
Prefer Local Pickup (Houston), but can be Crated and Shipped...please don't be afraid to ask for Shipping estimate. Usually $250-300 in Continental US. Probably need to add about $100 to that if I need to properly take everything apart and pack properly.
Asking $4600 for everything.
Thanks!
-
gDavis_wax
- Posts: 14
- Joined: Tue Sep 26, 2017 2:37 am
Gates CB500 16" Turntable & RCA Cutting Attachment +
You do not have the required permissions to view the files attached to this post.