Bartok Presto 8DG Lathe For Sale!
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Bartok Presto 8DG Lathe For Sale!
I bought Peter Bartok's studio from his estate, which included this Presto 8DG. It was sort of a sight-unseen, make a decision immediately or miss out on it type of deal. So I dropped everything and flew out to Tampa 48 hours later and picked up this lathe and three racks of homebrew tube gear and drove it back to Tucson in a Uhaul. When I got it home, I realized that it was HIGHLY modified by Peter (literally everything at his house was), and being that these huge lathes are less in my wheelhouse than the smaller portable ones. Sooo... I'm willing to let this go, exactly as I picked it up, for basically what I have in it.
This is sold as-is, and definitely needs some work to get it back running. It would be tough to get it back running the way Peter had it, because there was a ton of modifications (many of which seem to have to do with a feedscrew motor that I couldn't quite figure out), but probably wouldn't take too much work to get back to semi-stock if you are mechanical. All of these mods were done in the 50s I think.
Some of the mods:
-Definitely had some sort of feedscrew motor
-Includes a Van Epps cutterhead
-Playback tonearm (with an airplane Tanqueray botttle as a counterweight! hahah)
-some sort of floating suspension
-Lots of other mods that I have no idea what they do.
[redacted] includes freight to anywhere in the continental US.
https://flic.kr/p/2kGssp8
https://flic.kr/p/2kGw4rK
https://flic.kr/p/2kGssrc
This is sold as-is, and definitely needs some work to get it back running. It would be tough to get it back running the way Peter had it, because there was a ton of modifications (many of which seem to have to do with a feedscrew motor that I couldn't quite figure out), but probably wouldn't take too much work to get back to semi-stock if you are mechanical. All of these mods were done in the 50s I think.
Some of the mods:
-Definitely had some sort of feedscrew motor
-Includes a Van Epps cutterhead
-Playback tonearm (with an airplane Tanqueray botttle as a counterweight! hahah)
-some sort of floating suspension
-Lots of other mods that I have no idea what they do.
[redacted] includes freight to anywhere in the continental US.
https://flic.kr/p/2kGssp8
https://flic.kr/p/2kGw4rK
https://flic.kr/p/2kGssrc
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Bartok Presto 8DG Lathe For Sale!
I will also deliver this to Los Angeles for [redacted]
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Bartok Presto 8DG Lathe For Sale!
Here are a bunch of photos. The three RCA racks full of tube compressors, equalizers, amplifiers, etc are also available and also as is.
https://www.dropbox.com/sh/cx3a9hxx9ohh73h/AABuaTxxtuyKQQArGRBiO4Dxa?dl=0
https://www.dropbox.com/sh/cx3a9hxx9ohh73h/AABuaTxxtuyKQQArGRBiO4Dxa?dl=0
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Bartok Presto 8DG Lathe For Sale!
just here for the pics. beautiful! great effort as always Mike, hope it finds a nice new home
Re: Bartok Presto 8DG Lathe For Sale!
Last chance to take this as-is for cheap. Gonna start restoring it in a month.
Or, If you would be interested in purchasing it as a running machine (can be made stereo), let me know.
Or, If you would be interested in purchasing it as a running machine (can be made stereo), let me know.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Bartok Presto 8DG Lathe For Sale!
:drool: I wish I could scrounge that much cash and justify to my wife it's "cheap".....LOL!
Re: Bartok Presto 8DG Lathe For Sale!
“But honey, its an INVESTMENT... its not like im throwing the money away, im going to have this enormous and beautiful thing taking up more space in the house!”
My wife told me it was either her or the all the vintage crap. I would say I miss her, but I really don’t.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Bartok Presto 8DG Lathe For Sale!
If only I didn't already have a giant lathe taking up space in my barn that I was neglecting...I'd be all over this one.piaptk wrote: ↑Tue May 18, 2021 1:10 am“But honey, its an INVESTMENT... its not like im throwing the money away, im going to have this enormous and beautiful thing taking up more space in the house!”
My wife told me it was either her or the all the vintage crap. I would say I miss her, but I really don’t.
Re: Bartok Presto 8DG Lathe For Sale!
Krisd pulled out all the crazy spaghetti wire from the mods and we are very confident this can be put back to stock (or better). This is going to be a nice lathe.
Can come with a nice sounding stereo head if you want! Should be ready in a few weeks!
Can come with a nice sounding stereo head if you want! Should be ready in a few weeks!
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com