WTB - Presto - Australia

[andyburnout]

I’ve lurked this place on and off for over a decade but have never got to the point of purchasing a lathe besides the gakken toy record maker. I’m now at the point realising that I should have bought one when I was first hooked on the idea.

I’m looking for a functioning machine here in Australia, possibly adapted to 45rpm, any points in the right direction would be greatly appreciated.

[Aussie0zborn]

I've got a Presto 6N in Sydney. Will need some work.

[piaptk]

I've got a Presto 6N in Sydney. Will need some work.

If you get this one, I could possibly help you get it rolling via Skype depending on what it needs. It's a well engineered machine and usually fixable. What's it need, Mike?

[Aussie0zborn]

Thanks, Mike Needs re-assembly. See your PM.

[CSS]

I've got a Presto 6N in Sydney. Will need some work.

Hey Aussie0zborn - interested in this also. Have sent a PM but not sure if it was able to be sent as I'm a noob here.
Cheers

[MEGAMIKE]

thanks for PM Andy ..all I have is a 6n base, motor, rubbers, threads(I make my own too) but no plate and over head your best bet is to get the 6n from mike and get the other mike to help over the net..if any parts are missing that I have iam glad to help..if only I was near you I could help hands on..you buy the beers hahaah.
..aus mob 0432 420 875..

[andyburnout]

Cheers MegaMike, hopefully things pan out.