New Custom Plinths for SP10 MKII and SP15

[woodenturnip]

I'm here to show you new purpose built plinths for holding a Technics SP10 MKII and SP15.

Each plinth is custom made, can be adjusted to spin the turntable 90 degrees when needed, as for anyone who uses these professional turntables on a Vinyl Recorder T560, you can often find that the standard mass produced plinths are a little large making the outer edge of a 12” pretty damn close to the vacuum tube.

The hole for the turntable is customisable. This means that the plinths are perfect for a Vinyl Recorder T560, or to have as a home player plinth, with a suitable hole for the tonearm. I'm also able to engrave custom logos on them upon request.

The price for one of these plinths is €100 excluding shipping. If anyone is interested in these of has any questions, feel free to get in touch!

Pictured below is a prototype designed and tested for Pressure Mastering.

[PMST]

Very happy with mine!

[woodenturnip]

Unfortunately I am no longer making these plinths