Flat, low surface noise transparent blanks with pre-trimmed edges

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
woodenturnip
Posts: 12
Joined: Sun Feb 05, 2023 6:34 am

Flat, low surface noise transparent blanks with pre-trimmed edges

Post: # 63309Unread post woodenturnip
Wed Sep 06, 2023 3:54 am

Follow us over on Instagram @arcblankrecords for high-quality blanks in Europe!

1.png
2.png
3.png
4.png
5.png
You do not have the required permissions to view the files attached to this post.
Top

Click Here!

User avatar
PMST
Posts: 333
Joined: Sun Feb 03, 2019 10:08 am

Re: Flat, low surface noise transparent blanks with pre-trimmed edges

Post: # 63310Unread post PMST
Wed Sep 06, 2023 7:44 am

Just as a reference, i've cut around 2000 of these blanks and had no issues, all perfect.
Top
andybee
Posts: 703
Joined: Mon Aug 14, 2006 2:12 pm
Location: Germany

Re: Flat, low surface noise transparent blanks with pre-trimmed edges

Post: # 63312Unread post andybee
Thu Sep 07, 2023 8:41 am

I ordered some for testing :) all 2000 cut with one styli? wich styli are the best for lowest noise? thanks
Top
User avatar
PMST
Posts: 333
Joined: Sun Feb 03, 2019 10:08 am

Re: Flat, low surface noise transparent blanks with pre-trimmed edges

Post: # 63338Unread post PMST
Wed Sep 13, 2023 7:12 am

andybee wrote: ↑
Thu Sep 07, 2023 8:41 am
 I ordered some for testing :) all 2000 cut with one styli? wich styli are the best for lowest noise? thanks
Haha i wish all with 1 stylus! No these were cut over several months, with several styli. I'm using diamonds and getting the lowest noise floor i've ever cut. See how you get on :)
Top
User avatar
lucca2
Posts: 2
Joined: Tue Apr 06, 2021 11:10 am

Re: Flat, low surface noise transparent blanks with pre-trimmed edges

Post: # 63381Unread post lucca2
Tue Sep 19, 2023 3:10 pm

PMST wrote: ↑
Wed Sep 13, 2023 7:12 am
andybee wrote: ↑
Thu Sep 07, 2023 8:41 am
 I ordered some for testing :) all 2000 cut with one styli? wich styli are the best for lowest noise? thanks
Haha i wish all with 1 stylus! No these were cut over several months, with several styli. I'm using diamonds and getting the lowest noise floor i've ever cut. See how you get on :)
Where are you getting the diamond styli if you dont mind me asking?? thanks
Top
Post Reply

Click Here!