Deep Grooves Mastering - Plastic Cutting Video Guide
I've finally completed my plastic cutting video guide! Hope you all enjoy. Following the steps outlined in the video will save you time, frustration and possibly damage to your stylus. We fully support all of our DGM products and our proud to add this video to the documentation.
A video guide to cutting polycarbonate plastic blanks using the Deep Grooves Mastering Diamond Cutting Stylus. This is a step by step guide that includes explanations and practical advice. For more information on purchasing a diamond cutting stylus from Deep Grooves Mastering please visit our web site http://www.deepgroovesmastering.com
A video guide to cutting polycarbonate plastic blanks using the Deep Grooves Mastering Diamond Cutting Stylus. This is a step by step guide that includes explanations and practical advice. For more information on purchasing a diamond cutting stylus from Deep Grooves Mastering please visit our web site http://www.deepgroovesmastering.com
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
Bravo, wonderful video !
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
spitze! thanks.
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
I will have alternate translations into other languages coming soon. If not as subtitles than as alternate audio tracks.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
"avoid static"
i guess you don't have to translate...
cheers mex
i guess you don't have to translate...
cheers mex
-
- Posts: 1838
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
Brilliant video. You scared the shit out of me for a second when the rubber gloves went on but its all good now. Thanks for posting it!
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
LOLzzzzz
I know, weird. And, it takes getting used to working with them on. I wear gloves to cut lacquer as well. No prints on anything. Makes scope use easier to read with no prints on what you are looking at.
Nitrile gloves are anti-static. White rubber medical gloves are not. In fact white rubber gloves create static charge.
Two themes for the video: avoid static and be gentle as possible with your styli.
I know, weird. And, it takes getting used to working with them on. I wear gloves to cut lacquer as well. No prints on anything. Makes scope use easier to read with no prints on what you are looking at.
Nitrile gloves are anti-static. White rubber medical gloves are not. In fact white rubber gloves create static charge.
Two themes for the video: avoid static and be gentle as possible with your styli.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
Thanks for taking the time and making the effort to do this video T.
It's an excellent guide
One question... you mentioned the potential for channel cross-talk if you don't have the diamond stylus aligned correctly.
Would you expect this cross-talk to be 'weighted' in one direction or another depending upon the direction of mis-alignment?
In other words, if the diamond wasn't straight, the cross-talk would be greater L-to-R than R-to-L (or visa-versa).
Thanks again!
It's an excellent guide
One question... you mentioned the potential for channel cross-talk if you don't have the diamond stylus aligned correctly.
Would you expect this cross-talk to be 'weighted' in one direction or another depending upon the direction of mis-alignment?
In other words, if the diamond wasn't straight, the cross-talk would be greater L-to-R than R-to-L (or visa-versa).
Thanks again!
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
Amazing. I love that you believe in sharing information. It's very much appreciated.
Mad respect.
Mad respect.
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
Todd: The two replies above cover all I might have said. Bravo! for an excellent intro to the world of Makrolon!
Scully "500" with Westrex 3DIIa,
RA-1574E amps.
RA-1574E amps.
Re: Deep Grooves Mastering - Plastic Cutting Video Guide
I appreciate the feedback. Thanks.
I will continue to share and grow with the community. I feel a true connection with this medium. I want to insure disc recording always remains a viable option. Maybe even make it easier and less cost prohibitive for new cutters. Let's all keep those turntables turning.
I'll have more new stuff soon! For now, I posted two new videos:
Neumann VMS70 Heating Wire Mod Tape Remote Stop added to my MIDIToLatheControl
I will continue to share and grow with the community. I feel a true connection with this medium. I want to insure disc recording always remains a viable option. Maybe even make it easier and less cost prohibitive for new cutters. Let's all keep those turntables turning.
I'll have more new stuff soon! For now, I posted two new videos:
Neumann VMS70 Heating Wire Mod Tape Remote Stop added to my MIDIToLatheControl
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio