Chip is really flamable!

Stuff not covered by the other...Forii? whatever. General goofiness. (You should not post here unless you've been contributing elsewhere on this site.)

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:

Chip is really flamable!

Post: # 15261Unread post opcode66
Wed Jun 08, 2011 12:26 pm

On a lark I took some chip outside and lit it. Wow. It is violently flamable. Literally burst into flame.

Thinking of taking some camping to start fires with...
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio

User avatar
jjgolden
Posts: 342
Joined: Fri Jul 23, 2010 8:41 pm
Location: Ventura, Ca.
Contact:

Post: # 15262Unread post jjgolden
Wed Jun 08, 2011 3:16 pm

Hahaa, awesome. We usually save some up all year and make a giant one for the forth of July. The best way to do it is to light the match, blow it out, then while the match head is still red hot, drop it on the pile and run away quick...
It will smolder and usually make a giant smoke cloud, then the smoke & chip ignite like a flame from hell. I've got a VHS of it here somewhere from when I was about 10 year old,,, the flame went as high as the light post!
As you've discovered, it's highly toxic to breath and leaves a nasty stain on the street so beware, it's probably responsible for the whole in the ozone layer...

JJG

User avatar
Phinster
Posts: 168
Joined: Mon Dec 22, 2008 8:47 am

Post: # 15273Unread post Phinster
Thu Jun 09, 2011 7:27 am

For even more July 4 fun, tamp a load into a toilet paper tube, seal the ends.
bit of safety fuse. Keep your distance, then BANG!

Ain't nothin like guncotton......!

User avatar
jjgolden
Posts: 342
Joined: Fri Jul 23, 2010 8:41 pm
Location: Ventura, Ca.
Contact:

Post: # 15279Unread post jjgolden
Thu Jun 09, 2011 1:00 pm

Nice!... i'd be afraid of the molten chip shrapnel!
need a blast shield to hide behind for that one :>)

User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:

Post: # 15283Unread post opcode66
Thu Jun 09, 2011 5:06 pm

And suddenly, we turn into the Mythbusters...
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio

User avatar
blacknwhite
Posts: 483
Joined: Thu Apr 24, 2008 2:57 am
Location: US

Post: # 15285Unread post blacknwhite
Thu Jun 09, 2011 5:52 pm

from Aardvark Mastering website (http://www.aardvarkmastering.com/), owner's backyard

Image

User avatar
jjgolden
Posts: 342
Joined: Fri Jul 23, 2010 8:41 pm
Location: Ventura, Ca.
Contact:

Post: # 15288Unread post jjgolden
Thu Jun 09, 2011 8:09 pm

that's it!... nice one.

User avatar
concretecowboy71
Posts: 569
Joined: Mon Mar 08, 2010 10:13 am
Location: Cleveland, Ohio, USA
Contact:

Post: # 15751Unread post concretecowboy71
Tue Jul 05, 2011 5:27 pm

Just like everyone else, I could not resist lighting chip on fire either.

Emptied my chip jar on the driveway and tossed a match on it! Pretty cool.

I can't remeber who told me the story, but they said that cutting guys at radio stations used to save their chip and light some in the control room while the DJ was on mic. They would crack up outside watching the guy trying to maintain his composure on-air, while the equivalent of a smoke bomb is filling up the room!

I thought that was pretty funny. Lathe nerd humor.
Cutting Masters in Bristol,Virginia, USA
Well Made Music / Gotta Groove Records

User avatar
GrayI
Posts: 5
Joined: Sun Jun 26, 2011 5:08 pm
Location: Saskatoon, Saskatchewan, Canada

huffin' vinyl

Post: # 15769Unread post GrayI
Wed Jul 06, 2011 1:13 pm

My brother used to work as a parking meter attendant downtown, and he noticed there were melted records all over. Turns out some bums were lighting them and huffing the fumes to get high. Mmmm... PVC fumes...

Post Reply