My Cutter Head prototype

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

My Cutter Head prototype

Post: # 29314Unread post noizzer
Tue Mar 18, 2014 8:55 pm

My Cutter Head prototype
Top

Click Here!

User avatar
Self-lather
Posts: 240
Joined: Wed Jun 27, 2007 9:14 am
Location: Atlanta, Ga
Contact:
Contact Self-lather

Re: My Cutter Head prototype

Post: # 29315Unread post Self-lather
Tue Mar 18, 2014 10:50 pm

Wow, that looks rad! How does it sound?
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29316Unread post noizzer
Tue Mar 18, 2014 11:47 pm

Self-lather wrote:Wow, that looks rad! How does it sound?
Im wating some jerrys stylis for start the sound tests, I have my complete scully system and some ruby and adamant stylus but..... I prefer wait and not break my spensive stylus , Im trying to develop this head for semi pro and experimental entusiasts at very low cost, excuseme for my bad inglish jeje
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29317Unread post noizzer
Wed Mar 19, 2014 12:47 am

On my Scully
You do not have the required permissions to view the files attached to this post.
Top
User avatar
studiorp
Posts: 761
Joined: Thu Nov 01, 2007 6:55 pm

Re: My Cutter Head prototype

Post: # 29322Unread post studiorp
Wed Mar 19, 2014 7:25 am

Weight and power of channels ?
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29323Unread post noizzer
Wed Mar 19, 2014 10:20 am

studiorp wrote:Weight and power of channels ?
5watts per channel at 8 ohms , weight around of 600 grams
Top
User avatar
studiorp
Posts: 761
Joined: Thu Nov 01, 2007 6:55 pm

Re: My Cutter Head prototype

Post: # 29324Unread post studiorp
Wed Mar 19, 2014 11:30 am

600 grams ??? It's a big weight for a cutting head ... Why so ?
Top
User avatar
jjgolden
Posts: 342
Joined: Fri Jul 23, 2010 8:41 pm
Location: Ventura, Ca.
Contact:
Contact jjgolden

Re: My Cutter Head prototype

Post: # 29325Unread post jjgolden
Wed Mar 19, 2014 12:32 pm

Keep up the good work!
Looking forward to the pro model :>)

All the best,
JJG
Top
User avatar
dubcutter89
Posts: 362
Joined: Thu Oct 19, 2006 6:30 am
Location: between the grooves..

Re: My Cutter Head prototype

Post: # 29326Unread post dubcutter89
Wed Mar 19, 2014 12:43 pm

Nice work :D

Is it made out of metal or plastic?
Does it have feedback?

Interested in sound samples and frequency curves...

All the best,
Lukas
600 grams ??? It's a big weight for a cutting head ... Why so ?
Westrex - approx 2.5kg (!)
Caruso Brass - 582g
Neumann SX74 - approx. 500g
Caruso Alu - 285g
Neumann ES59 - 230g
...
Wanted: ANYTHING ORTOFON related to cutting...thx
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29327Unread post noizzer
Wed Mar 19, 2014 12:59 pm

studiorp wrote:600 grams ??? It's a big weight for a cutting head ... Why so ?
400 to 600 maybe, in this moment Im trying to develope a rear feedback
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29328Unread post noizzer
Wed Mar 19, 2014 1:05 pm

dubcutter89 wrote:Nice work :D

Is it made out of metal or plastic?
Does it have feedback?

Interested in sound samples and frequency curves...

All the best,
Lukas
600 grams ??? It's a big weight for a cutting head ... Why so ?
Westrex - approx 2.5kg (!)
Caruso Brass - 582g
Neumann SX74 - approx. 500g
Caruso Alu - 285g
Neumann ES59 - 230g
...
Hi density policarbonate and aluminum, steel thanks bro
Top
User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:
Contact opcode66

Re: My Cutter Head prototype

Post: # 29329Unread post opcode66
Wed Mar 19, 2014 1:18 pm

Very cool. Looking forward to seeing the progression!

Are you making your own coils or using an off the shelf speaker or transducer?
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29331Unread post noizzer
Wed Mar 19, 2014 3:24 pm

opcode66 wrote:Very cool. Looking forward to seeing the progression!

Are you making your own coils or using an off the shelf speaker or transducer?
At the moment speakers with modified coils , neodimium magnets and wire of 45 gauge
Top
User avatar
studiorp
Posts: 761
Joined: Thu Nov 01, 2007 6:55 pm

Re: My Cutter Head prototype

Post: # 29333Unread post studiorp
Wed Mar 19, 2014 3:54 pm

Torque tube material ? Brass perhaps or other ?
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29334Unread post noizzer
Wed Mar 19, 2014 5:08 pm

studiorp wrote:Torque tube material ? Brass perhaps or other ?
torque aluminum 5 milimeters like a westrex head
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29505Unread post noizzer
Sun Mar 30, 2014 10:03 pm

new update at my head prototype

Now I add a system for variable depth at the top of the head
it passes right through the torque tube without touching,
this is made with a tip of pencil but it can be changed easily by glass or ruby.
(the ball in the pen not scratch the material looking at microscopy this is a 0,3mm)

this stage on plastic prototype is finished successfully, now IM waiting for the
aluminum parts of the coils and the rest of the head to make a complete semi-pro version.

the size of the head now is more small.


sorry for my inglish.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Snakeheadfishlab
Posts: 109
Joined: Mon Feb 10, 2014 9:56 pm
Location: Sykesville,md.

Re: My Cutter Head prototype

Post: # 29518Unread post Snakeheadfishlab
Mon Mar 31, 2014 2:42 pm

Nice,let me know when your selling them!


Sent from my iPad using Tapatalk
Top
User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:
Contact opcode66

Re: My Cutter Head prototype

Post: # 29523Unread post opcode66
Mon Mar 31, 2014 7:37 pm

Me too
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Top
User avatar
noizzer
Posts: 41
Joined: Tue Jun 28, 2011 12:31 am
Contact:
Contact noizzer

Re: My Cutter Head prototype

Post: # 29524Unread post noizzer
Mon Mar 31, 2014 8:57 pm

opcode66 wrote:Me too

of course! I will have a resonance test stage, sound, cut ... then I will send a head to steve or to you opcode for testing purposes and then will be for sale!

thanks
Top
User avatar
Self-lather
Posts: 240
Joined: Wed Jun 27, 2007 9:14 am
Location: Atlanta, Ga
Contact:
Contact Self-lather

Re: My Cutter Head prototype

Post: # 29526Unread post Self-lather
Mon Mar 31, 2014 9:43 pm

I can't wait for these to be available. Any rough idea of the price range?

-Thomas
Top
Post Reply

Click Here!