- uvoscillator
- Posts: 129
- Joined: Wed Aug 22, 2012 1:37 am
- Location: Russia, St.Petersburg
FS: Unfinished project – stereo head and overhead.
My Dear Trolls,
need some cash on other projects, so what I can sell ?
Synths? Oh, please, no !
Car? Oh, may be better synths ?
Okay, it is hard decision, but I'm offering to someone handy my unfinished project, all that you've see on this folder is comes as one lot:
https://drive.google.com/folderview?id=0B7-V3HakD41BQUpWM3JKcnNoTk0&usp=sharing
1) This is Fairchild overhead, very clean, just like new. Looks like it comes from 16" lathe. Lot of parts is not included on photo. Like ruler, old Fairchild head mount with advance ball, some cogwheels etc.
2) This is DIY stereo cutting head. Made on precise professional machinery after years of experimenting. No feedback, but sounds fantastic even without it !
Torque tube cone is perfect and tight with standard Neumann's 320 shank..
I am even give half-year guarantee and infinite post-guarantee to buyer on this head.
Don't ask me too many technical details about it, this brilliant work was done not by myself, but I'm in touch with authors and buyer will be in contact too.
And yes, it was done here, in Russia.
Sound example can be found in that shared google folder too, I'm not a big specialist, but before grab this record I've calibrated record tract with 1kHz 0db stereolab record to get 0db on DAW.
3) Also head was already mounted on overhead, also with very neat machined aluminum mounting. BTW this mounting can be used also for heads like Grampian. Spring and head weight is perfectly complements each other to get 14g pressure for cutting.
Okay, whats else – also in lot three(3) NEW never opened Myshank 320 diamond styluses. And nice aluminum tool to mount them on head.
So, I'm asking not a little and not so much – 3800 USD with PP fees and shipping included.
All this stuff separately cost me about 4400 !
And again – this head comes with half-year warranty, even if you will burn it, we'll recoil it.
Many people know me here, so you can be sure it is not scam.
Ohh my, can't believe I do that !
PS E-mail me with offer if you want something separately from this lot.
uvoscillator at gmail dot com
Thanks,
Sergey
need some cash on other projects, so what I can sell ?
Synths? Oh, please, no !
Car? Oh, may be better synths ?
Okay, it is hard decision, but I'm offering to someone handy my unfinished project, all that you've see on this folder is comes as one lot:
https://drive.google.com/folderview?id=0B7-V3HakD41BQUpWM3JKcnNoTk0&usp=sharing
1) This is Fairchild overhead, very clean, just like new. Looks like it comes from 16" lathe. Lot of parts is not included on photo. Like ruler, old Fairchild head mount with advance ball, some cogwheels etc.
2) This is DIY stereo cutting head. Made on precise professional machinery after years of experimenting. No feedback, but sounds fantastic even without it !
Torque tube cone is perfect and tight with standard Neumann's 320 shank..
I am even give half-year guarantee and infinite post-guarantee to buyer on this head.
Don't ask me too many technical details about it, this brilliant work was done not by myself, but I'm in touch with authors and buyer will be in contact too.
And yes, it was done here, in Russia.
Sound example can be found in that shared google folder too, I'm not a big specialist, but before grab this record I've calibrated record tract with 1kHz 0db stereolab record to get 0db on DAW.
3) Also head was already mounted on overhead, also with very neat machined aluminum mounting. BTW this mounting can be used also for heads like Grampian. Spring and head weight is perfectly complements each other to get 14g pressure for cutting.
Okay, whats else – also in lot three(3) NEW never opened Myshank 320 diamond styluses. And nice aluminum tool to mount them on head.
So, I'm asking not a little and not so much – 3800 USD with PP fees and shipping included.
All this stuff separately cost me about 4400 !
And again – this head comes with half-year warranty, even if you will burn it, we'll recoil it.
Many people know me here, so you can be sure it is not scam.
Ohh my, can't believe I do that !
PS E-mail me with offer if you want something separately from this lot.
uvoscillator at gmail dot com
Thanks,
Sergey
Best !
Re: FS: Unfinished project – stereo head and overhead.
please a movie https://www.youtube.com/watch?v=Eg32bynVLA8&feature=youtu.be , test 1000 Hz channel separation L R, the power of 0dB, can I buy ..
- uvoscillator
- Posts: 129
- Joined: Wed Aug 22, 2012 1:37 am
- Location: Russia, St.Petersburg
Re: FS: Unfinished project – stereo head and overhead.
unfortunately no more further tests I can cut now.
head is too big for my current lathe, sorry
head is too big for my current lathe, sorry
Best !
Re: FS: Unfinished project – stereo head and overhead.
GAGARIN DYNAMIC CUTTERHEAD
Good day for all lathe trolls. We are Studio NMCP from Russia. We built this cutterhead.
We understand, dynamic heads never been perfect, but that is the way to get a good records. Video will tell you more.
If you have interest we can made test record for you.
Also we have wav rip. Mail please if you need.
Thank to Opcode66 deepgroovemastering.com for sapphire stylus, that was sent to us once upon a time. We remember your kindness, Master.
For this head we recommend blanks and diamond stylus 320P from Steven myshank.com
Thank you for your excellent products friend!
Thank Lathetrolls.com forum for archive of useful information!
nmcpstudio@gmail.com
Good day for all lathe trolls. We are Studio NMCP from Russia. We built this cutterhead.
We understand, dynamic heads never been perfect, but that is the way to get a good records. Video will tell you more.
If you have interest we can made test record for you.
Also we have wav rip. Mail please if you need.
Thank to Opcode66 deepgroovemastering.com for sapphire stylus, that was sent to us once upon a time. We remember your kindness, Master.
For this head we recommend blanks and diamond stylus 320P from Steven myshank.com
Thank you for your excellent products friend!
Thank Lathetrolls.com forum for archive of useful information!
nmcpstudio@gmail.com
Re: FS: Unfinished project – stereo head and overhead.
Taking this opportunity, may be someone have useless master for press?